GE Monogram ZFSB23DSS Tools Required Flooring, Materials Required, Grounding the Refrigerator

Page 4

 

Installation Instructions

 

 

TOOLS REQUIRED

FLOORING

• Tinsnips to cut banding

For proper installation, this refrigerator must be placed on

• Stepladder

a level surface of hard material that is at the same height

• Bucket

as the rest of the flooring. This surface should be strong

• Level

enough to support a fully loaded refrigerator.

• Appliance hand truck

IMPORTANT NOTE: Protect the finish of the flooring. Cut a

• Tubing cutter

• #2 Phillips screwdriver

large section of the cardboard carton and place under the

• Drill and appropriate bits

refrigerator where you are working.

3/8", 5/16" and 7/16" hex socket

1/8" Allen wrench

Safety glasses

MATERIALS REQUIRED

1/4" O.D. compression nut and 2 ferrules (sleeves) OR GE SmartConnectRefrigerator Tubing Kits

GROUNDING THE REFRIGERATOR

IMPORTANT – (Please read carefully)

FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED.

The power cord of this appliance is equipped with a 3-prong (grounding) plug which mates with a standard 3-prong (grounding) wall receptacle to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a standard 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE THIRD (GROUND) PRONG FROM THE POWER CORD.

DO NOT USE AN ADAPTER PLUG TO CONNECT THE REFRIGERATOR TO A 2-PRONG OUTLET.

DO NOT USE AN EXTENSION CORD WITH THIS APPLIANCE.

4

Image 4
Contents Installation Instructions Monogram.comContents Before YOU BeginInstallation Space Installation in a cornerAdditional Specifications Air Circulation ClearancesTools Required Flooring Materials RequiredGrounding the Refrigerator Important Please read carefullyModel ZFSB25 Move Refrigerator IndoorsModel ZFSB23 Move Refrigerator Indoors Install Water Line To move the refrigerator indoorsAgainst the truck only Shut off the main water supplyConnect Water Supply Connect PowerMove Refrigerator Into Position To Adjust the Rollers Level the RefrigeratorLevel the Doors Screw Down Support LEGInstall Toekick Temperature ControlsStart Icemaker Page GE Consumer & Industrial