Bracket | GE Monogram Drawer Freezer Refrigerator instruction

Installation Instructions

STEP 2A LOCATE ANTI-TIP FLOOR
BRACKET (CONT.)
Figure 2 – Acceptable Screw
Placement Locations
Preferred Installation –	Preferred Installation –
Wood	Concrete
Minimum Acceptable #1 –	Minimum Acceptable #2 –
Wall Plate Stud	Wood Floor
Minimum Acceptable #3 –
	Concrete Floor

STEP 2B INSTALL ANTI-TIP BRACKET

WOOD Wall and Floor Construction:

A. Drill the appropriate number of 1/8” pilot holes in the center of each floor bracket hole being used (a nail or awl may be used if a drill is not available) AND remove the locator template from the floor.

B. Mount the anti-tip floor bracket by fastening the 2, or preferably 4, #10-16 hex-head screws tightly into place as illustrated in Figure 3.

Figure 3 – Attachment to

Wall and Floor

Rear RH Corner		Wall
of the Refrigerator	Floor Bracket
	2 Screws Must	Wall
	Enter Wood	Plate
	or Metal Stud	Stud
	Floor

STEP 2B INSTALL ANTI-TIP BRACKET (CONT.)

CONCRETE Wall and Floor Construction:

A. Anchors required (not provided): 4 each 1/4” x 1 1/2” lag bolts

4 each 1/2” O.D. sleeve anchors

B. Drill the recommended size holes for the anchors into the concrete at the center of the holes marked in Step 2.

C. Install the sleeve anchors into the drilled holes. Place the anti-tip floor bracket as indicated in Step 2. Remove the locator template from the floor.

D. Install the lag bolts through the anti-tip floor bracket and tighten appropriately.

WOOD Wall and TILE Floor Construction:

A. For this special case, locate the 2 wall holes identified in Fig. 1. Drill an angled 1/8” pilot hole (approx. as shown in Fig. 3) in the center

of each hole.

B. Mount the anti-tip floor bracket using the Minimum Acceptable Installation #1, as illustrated in Fig. 2.

STEP 2C POSITION THE REFRIGERATOR TO ENGAGE THE ANTI-TIP FLOOR AND BASE BRACKETS

A. Before pushing the refrigerator into the opening, plug the power cord into the receptacle and connect waterline (if equipped). Check for leaks.

B. Locate the refrigerator’s RH side and move back approximately in line with the RH side of

the cabinet opening, W. This should position

the anti-tip floor bracket to engage the anti-tip base bracket on the refrigerator.

C. Gently roll the refrigerator back into the cabinet opening until it comes to a complete stop. Check to see if the refrigerator front lines up with the cabinet front face. If not, carefully rock the refrigerator forward and backward until engagement occurs and you notice that

the refrigerator is fully pushed up against the rear wall.

D. OPTIONAL: Adjust the rear (and front) wheel height settings to fully engage the rear anti-tip brackets, while also aligning the refrigerator front with

the cabinet front face.

NOTE: If you pull the refrigerator out and away from the wall for any reason, make sure the anti-tip floor bracket is engaged when the refrigerator is pushed back against the wall rear wall.

Drawer Freezer Refrigerator specifications

The GE Monogram Drawer Freezer Refrigerator is a premium appliance designed for the modern kitchen, combining style, functionality, and advanced technology. This innovative refrigerator features a distinctive drawer design, which not only adds a touch of elegance to your kitchen but also enhances accessibility and organization.

One of the standout features of the GE Monogram Drawer Freezer Refrigerator is its spacious interior. With generous storage capacity, it allows you to keep a wide range of items, from fresh produce to frozen goods, all organized and easily accessible. The dual-drawer configuration enables you to separate frozen items for quick retrieval and optimal storage.

This refrigerator is equipped with advanced cooling technologies to ensure that your food remains fresh for extended periods. The climate control technology uses sophisticated sensors to monitor temperature fluctuations and maintain the ideal environment for various food types. This ensures that fruits, vegetables, and meats are preserved in their best state.

Another notable feature is the integrated ice maker, which delivers a steady supply of ice without taking up valuable freezer space. The self-cleaning feature of the ice maker reduces maintenance efforts, allowing you to spend more time enjoying your kitchen rather than maintaining it.

The LED lighting within the refrigerator provides bright, efficient illumination, allowing you to easily find what you need, even in low-light conditions. This thoughtful design element not only enhances visibility but also contributes to energy efficiency.

The GE Monogram Drawer Freezer Refrigerator is also equipped with a Wi-Fi connection, allowing you to control various functions remotely via your smartphone. This connectivity lets you monitor the temperature, receive alerts, and even manage settings while you're away from home.

Additionally, the sleek and elegant design of the appliance makes it a focal point in any kitchen. The stainless steel finish is both stylish and durable, resisting smudges and fingerprints. The customizable panels allow homeowners to match their kitchen decor seamlessly.

In summary, the GE Monogram Drawer Freezer Refrigerator is a sophisticated appliance that combines modern technologies with practical features, ensuring that your food stays fresh while making a beautiful addition to your kitchen. With its thoughtful design, advanced cooling systems, and user-friendly technology, it fulfills the needs of any culinary enthusiast.