American Standard 2555.501 Install Trim, Install Handle, Adjust HOT Limit Stop

2 INSTALL TRIM

CAUTION: Protect finish on SHOWER ARM and

SHOWER HEAD when installing.

When finished tiling the wall, remove PLASTER GUARD (A) and turn off water supply.

Push CAP (1) over VALVE CARTRIDGE (2).

Mount ESCUTCHEON (3) and gasket to valve body with SCREWS (4).

Remove PIPE CAP (5) from shower pipe.

Install SHOWER ARM (6) and SHOWER HEAD (7).

3 INSTALL HANDLE

Install HANDLE BUSHING (1) onto CAP (2).

Find correct position of HANDLE (3) and push HANDLE (3) onto VALVE STEM (4).

Install HANDLE SCREW (5) and push in INDEX CAP (6).

Check proper operation of HANDLE.

Turn on water supply on and test installed fitting. Operate valve and diverter spout.

1

7

6

5

2

1

3

4

A

5

6

4 2

3

						3
		579
	3		11	3		5
1					51
0
					1
						1
						4

4 ADJUST HOT LIMIT STOP

By restricting HANDLE rotation and limiting the amount of hot water allowed to mix with the cold, the HOT LIMIT SAFETY STOP (1) reduces risk of accidental scalding. To set the maximum hot water temperature of your faucet, all you need to do

is adjust the setting on the HOT LIMIT SAFETY STOP (1).

Turn CARTRIDGE STEM (2) to the OFF position (coldest setting) before making adjustment to HOT LIMIT STOP (1). Use a

flat blade screwdriver to pry free the HOT LIMIT SAFETY STOP (1). Pull forward and rotate counterclockwise one number to limit hot water temperature. Use ARROW (3) on CARTRIDGE (4) and NUMBERS (5) on HOT LIMIT STOP (1) for indication.

4

2

3

2

						1
						5
						1
						3
					1	1
				9
			7
		5
	3
1

COLDER

(Larger Numbers)

0 1 3 5 7 9 11 13 15

HOTTER

(Smaller Numbers)

0 1 3 5 7 9 11 13 15

5

					1
					5
					1
					3
					1
				9	1
			7
		5
	3
1					1

.      
3 & 7