Tamron MST2000 operation manual Extps Tpscal, Aprsrc Aprcon Exapz, Apzcal Exaps

Page 14

OPERATION MANUAL

PROGRAM PARAMETERS

 

 

 

Parameter

Description

FactoryDefault

 

 

 

EX_TPS

TPSCAL

External Temperature Span. The External Temperature Span is the upper range setting for the external 4-20 milliamp ‘temperature’ input channel. The avail able range is:

English Unit Version: 0.000 to 990.0000 degrees F.

Metric Unit Ver sion: 0.000 to 990.0000 de grees C.

Temperature Span Calibration. The Temperature Span Calibration Value is the 20 milliamp (span) count value from the external 4-20 milliamp ‘temperature’ input channel. This parameter is used to calibrate the span point of the incoming 4-20 signal from the external temperature device. To calibrate the span of the incoming 4-20 signal, press the EDIT key. The screen will display IN20MA. Set the incoming signal for 20 milliamps (or connect an external 4-20 calibrator set for 20 milliamps) and press the EDIT key. The MST2000 will measure the external temperature input channel and save the new 20 milliamp reference to memory.

200.0000

21000

If an external temperature op tion is pre-installed and calibrated at the factory this will be custom set for that unit.

APRSRC

APRCON

EX_APZ

Absolute Pressure Source. Available assignments are 0 = CONstant 0 = CONstant

and 1 = EXTernal. þNote: MST2000 DP sen sor max i mum op er at ing static pres sure is 25 PSID.

Absolute Pressure Constant. The absolute pressure constant can

14.6960 for English.

be used for mass flow calculations when no external absolute pressure

1.01325 for Metric.

input is available and is entered as the average absolute pressure

 

inside the duct. The avail able range is:

 

English Unit Version: 0.000 to 100.0000 PSIA.

 

Metric Unit Ver sion: 0.000 to 100.0000 Bar.

 

External Absolute Pressure Zero. The External Absolute Pressure

0.000

Zero is the lower range (4 milliamp zero) setting for the external 4-20

 

milliamp ‘absolute pressure’ input channel. The avail able range is:

 

English Unit Version: 0.000 to 100.0000 PSIA.

þNote: MST2000 DP sensormaximum

Metric Unit Ver sion: 0.000 to 100.0000 Bar.

op er at ing static pres sure is 25 PSID.

APZCAL

EX_APS

Absolute Pressure Zero Calibration The Absolute Pressure Zero Calibration value is the 4 milliamp (zero) count value from the external 4-20 milliamp ‘absolute pressure’ input channel. This parameter is used to calibrate the zero point of the incoming 4-20 signal from the external 4-20 absolute pressure device. To calibrate the zero point of the incoming 4-20 signal, press the EDIT key. The screen will display IN4MA. Set the incoming signal for 4 milliamps (or connect an external 4-20 calibrator set for 4 milliamps) and press the EDIT key. The MST2000 will measure the external absolute pressure channel and save the new 4 milliamp reference to memory.

External Absolute Pressure Span. The External Absolute Pressure Span is the upper range setting for the external 4-20 milliamp ‘absolute pressure’ input channel. The available range is:

4175

If an external absolute pressure option is pre-installed and calibrated at the factory this will be custom set for that unit.

25.0000 for English.

1.7237 for Metric

English Unit Version: 0.000 to 100.0000 PSIA.

þNote: MST2000 DP sensormaximum

Metric Unit Ver sion: 0.000 to 100.0000 Bar.

op er at ing static pres sure is 25 PSID.

Brandt Instruments, Inc.

MST2000 Multivariable SMARTFLOW ® Transmitter

Page 15

Page 13 Page 15
Image 14
Page 13 Page 15
Contents MST2000 Series MST2100, Nema Thermo Brandt Instruments, IncTable of Contents Product OverviewSeries Loop Powered Multivariable Smartflowtm Transmitter Model NumberSpecifications Functional SpecificationsDimensions MST2100 Nema 1 Enclosure Mounting and Process ConnectionsContinuous Purge Option MST2400 Nema 4X EnclosureBal ancing the Purge if the Pro cess is not in Op er a tion Integral High Pressure Blowdown SystemBal ancing the Purge if the Pro cess is in Op er a tion Integral 5 MicronCoalescentFilterLCD Display and Integral KEY PAD Te gral Power Sup ply Op tionElectrical Connections CanadianStandardsAssociationHazardousAreaApprovalsStartup MST2000 Operational Modes and Start UPLCD Display Programming Editing of a Hardware/Operating Mode ParameterProgramming Se lect the Pa ram e ter to EditProgram Parameters LcdconFspan Stdden Tmpsrc Tmpcon Rtdcal Extpz Tpzcal Program ParametersApzcal Exaps Extps TpscalAprsrc Aprcon Exapz Outpto ApscalInputo Inputg Defdsp OutptgAvgfac DspresPword Bdenb HtenbLow Byte ‘BIT’ Definitions Alarm Programming InformationAlarm ‘ENABLE’ Word Definition High Byte ‘BIT’ DefinitionsAlarm Sta tus ‘BIT’ Def i ni tions Alarm Programming InformationAlarm ‘STATUS’ Word Definition Alarm ‘STATUS’ Word Decimal Decode Examples Alarm ‘ENABLE’ Word Decimal CalculationExamplesLCD Icon, Fail-low, RTD Fault and Under-range Alarm ‘STATUS’ Word =Scfm = Ae × 23972..677 × DP × P ÷T Formulas & Conversion Factors Alarm ‘STATUS’ Word =Formulas & Conversion Factors Metric Conversion FactorsIs removed for all I.S. and Division 2 approved MST2000’s Optional Module InstallationTest Jack Isolated 4-20mA Input Mod ules ISO Mod uleCalibrating the ISO Module Optional Module InstallationProgramming the MST2000 to recognize the ISO Modules Digital Input / Output Module Installation Hart CommunicationsModuleMST2000 Hart Communications Information Power and Loop ConditionsMST2000 Hart Communications Information Hart ConnectionsPower Supply Requirements Hart Communication DistancePv = primary variable Intrinsic Safety ConsiderationsHart Command Information Wiring Diagrams Power Sup ply & Ab so lute Pres sure Trans mit terWiring Diagrams Power Sup ply and Ab so lute Pres sure Trans mit terIntrinsicallySafeInstallations MST2000 Hazardous Area InstallationMST2000HazardousAreaInstallation Division 2 And Other InstallationsApproved Options MST2000 Hazardous Area Installation15.4 MST2000 I.S. Installation Drawing SC37-4000-00 Output Gain Calibration of the MST2000Output mA Calibration Cal i bra tion of the MST2000 DP Calibration

MST2000 specifications

The Tamron MST2000 is a groundbreaking optical device that showcases the company's commitment to innovation and quality in the world of photography and imaging. Designed for both professional photographers and enthusiastic hobbyists, the MST2000 delivers exceptional image quality, versatility, and ease of use.

One of the standout features of the Tamron MST2000 is its superior optical design. It incorporates advanced lens element configurations that minimize aberrations and distortion, ensuring sharp and vibrant images across the entire frame. The lens construction includes high-grade glass elements that enhance light transmission, resulting in crystal-clear images even in low-light conditions. This is particularly beneficial for night photography or indoor settings where lighting may be challenging.

The MST2000 also boasts an impressive zoom range, allowing photographers to capture a wide variety of subjects with ease, from breathtaking landscapes to intimate close-ups. Its robust zoom mechanism enables seamless transitions between focal lengths, helping users to adapt to different shooting environments quickly. The zoom is complemented by a fast and accurate autofocus system that ensures subjects are sharply focused, allowing photographers to capture fleeting moments with confidence.

In terms of build quality, the Tamron MST2000 is constructed with durability in mind. The lens features a weather-sealed body, making it resistant to moisture and dust. This design consideration allows photographers to shoot in diverse conditions without fear of damage, ensuring that the MST2000 is a reliable companion in any situation.

Another notable technology featured in the MST2000 is the vibration compensation system, which helps to reduce the effects of camera shake. This is particularly beneficial when shooting at slower shutter speeds or using longer focal lengths, allowing for clearer images without the need for a tripod.

For those who appreciate creative control, the MST2000 includes various customizable settings that enhance the user experience. Photographers can fine-tune parameters such as focus and aperture easily, providing them with the flexibility to achieve their desired artistic effects.

In summary, the Tamron MST2000 offers a sophisticated combination of advanced optical technologies, versatility, and user-friendly features. Whether capturing sweeping panoramas or intricate details, this lens is designed to meet the demands of today's photographers while inspiring creativity and exploration in every shot.
Top Page Image Contents