Graco 1466 Mix ’N Move Toy System, To Install Covers, To Remove Covers, Attaching the Seat Belt

Page 5

Mix ’N Move™ Toy System

Your swing is equipped with two toys in Graco’s Mix ’N Move™ interchangeable toy system. This system, featured on various Graco® swings, highchairs, strollers and mobile entertainers, allows your baby to enjoy a changing array of amusements and even take favorites along. Look for other toys in the enclosed leaflet.

Step 1.

To install a toy, insert the two prongs on the toy base into a toy mount at the notches.

Step 2.

Turn toy base one quarter turn until you feel the toy snap into place.

Check that toy is firmly inserted by pulling on the toy.

Toy is removable (turn it the other way with a little pressure) so that you can replace it with other toys when desired.

If you choose not to use the toys at this time, please insert the two plastic covers as described below to fill the holes in the tray.

To Install Covers

To insert a cover into the tray of your swing, first push one side into a notch, then push in the other side.

To Remove Covers

Remove child from swing before removing covers.

With the aid of a flat head screwdriver, carefully pry up one edge of a cover until it comes off.

Throw the covers away immediately; they are not reusable.

152-12-99 IS2481

9

Attaching the Seat Belt

Step 1.

Thread one end of the seat belt through the belt retainer as shown.

Step 2.

Thread both ends of seat belt through the buckles as shown.

CHECK that the belt is threaded correctly by pulling on the seat belt. The belt should not slip through the buckle.

To release, push in on front of buckle.

Attaching the Seat Cover

Step 1.

Slide the pocket of the seat cover over the top of the seat as shown.

Step 2.

Pull the crotch strap and both ends of the seat belt through the slots in the seat cover.

Step 3.

Push the elastic loop through the hole on one side of seat.

Step 4.

Fold cover around bottom of seat. Then fasten the hook into the elastic loop on one side as shown. Repeat on other side.

CAUTION: Be sure the seat cover at armrest does not interfere with tray latching.

10

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Customer Satisfaction Model NosFailure to follow these warnings could result in seriou Congratulations on your purchase of a Graco swingAtion Hazard Gs and the assembly instructions rious injury or deathAttaching the Base Tubes Attaching the LegsAttaching the Feet StepAttaching the Tray Attaching the Hanger Tubes and SeatAttaching the Back Brace Mix ’N Move Toy System To Install CoversTo Remove Covers Attaching the Seat BeltUsing the Tray Installing the BatteriesUsing the Swing Reclining Back Four PositionsOperating the Six-Speed Swing Using the TimerTo Turn Off the Swing To Use MusicReplacement Parts Caring for Your Battery Powered SwingParts List Instructions for ordering swing parts

1466 specifications

The Graco 1466 is a powerful and versatile airless paint sprayer designed for both professionals and DIY enthusiasts looking for efficiency and high-quality results in their painting projects. Known for its robust performance, the Graco 1466 stands out in the market with several notable features, cutting-edge technologies, and characteristics that make it a preferred choice among users.

One of the key features of the Graco 1466 is its powerful motor, which provides the necessary pressure to spray a variety of coatings, including paints, stains, and sealers. This strength allows the user to tackle various surfaces, from walls and fences to decks and furniture, making it suitable for both interior and exterior applications. The unit is equipped with a 5/8 HP motor, delivering an impressive output that allows for efficient project completion with minimal effort.

The Graco 1466 also includes a flexible suction hose that allows for easy paint pickup from a 1 or 5-gallon container, offering the convenience of working with different sized paint containers without limitations. In addition, the unit features an adjustable pressure control knob, enabling users to customize the flow rate according to their specific painting requirements. This feature ensures that the user can achieve a smooth and even finish, reducing the risk of drips and overspray.

Ergonomically designed, the Graco 1466 is lightweight and portable, making it easy to move around the job site. It features a robust frame, ensuring durability and stability during operation, coupled with a convenient carry handle that enhances mobility. The paint sprayer is equipped with a reversible spray tip, which allows for quick unclogging during operation, thus minimizing downtime and improving overall productivity.

Another significant aspect of the Graco 1466 is its ease of cleaning and maintenance. The unit features a simple flush system that makes the cleaning process straightforward after use, which is essential for maintaining the sprayer's longevity. Users can flush the system with water or solvent, depending on the type of paint used, ensuring that it remains in optimal working condition for future projects.

In summary, the Graco 1466 combines powerful performance, user-friendly features, and cutting-edge technologies to provide an exceptional painting experience. Its versatility, adjustable pressure control, lightweight design, and easy maintenance reflect Graco’s commitment to quality and innovation in the painting industry, making the Graco 1466 a dependable choice for any painting endeavor.
Top Page Image Contents