Installing the Batteries, Using the Tray

Using the Head Supports (on certain models)

Installing the Batteries

To provide head support for a smaller child, your swing model may include one of the following accessories:

Two head supports:

Insert them into the pockets in the back of the cloth seat pad.

Back of cloth seat pad

Head support cushion: Use it in the seat as shown, threading the seat belt straps through the corresponding holes in the cushion.

Using the Tray

If tray does not latch, check back brace to be sure the word “REAR” is away from the seat.

Step 1.

With baby out of swing, open the battery compartment lid by inserting a coin (penny, nickel or dime) into the coin slot. After the lid pops open, swing it down and remove it.

Step 2.

Insert four “D” cells. CHECK that the batteries are put in correctly. Your swing will not run if the batteries are put in backwards.

Step 3.

To replace lid, put the two tabs of the lid into the two slots in the bottom of the motor housing. Swing lid up, and press it into place until you hear the latch click.

Coin slot

Unlatch the tray by squeezing the two latches under the tray at the same time, and lift up.

Be careful not to let the tray hit your baby when lifting or closing the tray.

Step 2.

To latch tray, push it down firmly.

Tray must be latched at all times when baby is in swing. Pull up on tray to be sure it is latched.

Reclining Back—

Four Positions

Pull adjustment wire upward and pull seat backward to recline seat. Extra pressure is required to go from the third position to full recline.

For upright position, simply lift back of seat forward.

Using the Swing

CHECK that all parts are securely fastened together before using the swing.

Step 1.

Open tray and seat belt. Place baby in the seat.

Step 2.

Fasten the seat belt. Adjust belt as needed to get a snug fit around your child.

Step 3.

Close the tray. CHECK that the tray is latched by pulling up on the tray.

Do not depend on the tray or seat belt alone to hold your baby. Always secure your baby with both the seat belt and tray when your child is in the swing.

11
11	12

1466 specifications

The Graco 1466 is a powerful and versatile airless paint sprayer designed for both professionals and DIY enthusiasts looking for efficiency and high-quality results in their painting projects. Known for its robust performance, the Graco 1466 stands out in the market with several notable features, cutting-edge technologies, and characteristics that make it a preferred choice among users.

One of the key features of the Graco 1466 is its powerful motor, which provides the necessary pressure to spray a variety of coatings, including paints, stains, and sealers. This strength allows the user to tackle various surfaces, from walls and fences to decks and furniture, making it suitable for both interior and exterior applications. The unit is equipped with a 5/8 HP motor, delivering an impressive output that allows for efficient project completion with minimal effort.

The Graco 1466 also includes a flexible suction hose that allows for easy paint pickup from a 1 or 5-gallon container, offering the convenience of working with different sized paint containers without limitations. In addition, the unit features an adjustable pressure control knob, enabling users to customize the flow rate according to their specific painting requirements. This feature ensures that the user can achieve a smooth and even finish, reducing the risk of drips and overspray.

Ergonomically designed, the Graco 1466 is lightweight and portable, making it easy to move around the job site. It features a robust frame, ensuring durability and stability during operation, coupled with a convenient carry handle that enhances mobility. The paint sprayer is equipped with a reversible spray tip, which allows for quick unclogging during operation, thus minimizing downtime and improving overall productivity.

Another significant aspect of the Graco 1466 is its ease of cleaning and maintenance. The unit features a simple flush system that makes the cleaning process straightforward after use, which is essential for maintaining the sprayer's longevity. Users can flush the system with water or solvent, depending on the type of paint used, ensuring that it remains in optimal working condition for future projects.

In summary, the Graco 1466 combines powerful performance, user-friendly features, and cutting-edge technologies to provide an exceptional painting experience. Its versatility, adjustable pressure control, lightweight design, and easy maintenance reflect Graco’s commitment to quality and innovation in the painting industry, making the Graco 1466 a dependable choice for any painting endeavor.