Russound ST2 instruction manual Bank Name Procedure

ST2 TUNER PROGRAMMING

ST2 TUNER SETUP MENU

Bank Name

A custom name can be assigned to each of the six banks of both Tuner 1 and Tuner 2.

1.Enter the Setup Menu by pressing and holding the TNR SEL button.

2.Press MEM Up/Down until BANK NAME appears on the tuner.

3.Press BAND.

4.Press the Tune Up/Down buttons to select the Tuner #.

5.Press BAND to advance.

6.Press the Tune Up/Down buttons to select the Bank #.

7.Press BAND. BANK NAME appears again.

8.Press BAND to access the Bank Name entry screen.

9.Press Tune Up/Down to select a character and MEM Up/Down to change a character posi- tion. Up to 12 characters can be entered one by one. A blinking LED block indicates the place- ment of the character being entered.

10.Press BAND when bank name is entered.

11.SAVE CHANGES will appear.

12.Press Tune Up/Down to select Yes or No.

13.Press BAND to save bank name. The Bank Name menu returns to the Tuner # prompt to name other banks, or press TNR SEL to exit the Bank Name menu.

Press and Hold TNR SEL button

Bank Name Procedure

TNR TNR

SEL SEL

MEM	BANK	SOURCE	REGION	FACTORY	UPDATE	SYSTEM	Setup
NAME	NAME	NUM		INIT	FIRMW	INFO
			Procedure				Menu
Procedure	Procedure	Procedure		Procedure	Procedure	Procedure

TNR

SEL

TUNER #	BANK #	BANK	SAVE
		NAME	CHANGES?
		Selects
		character
		Selects
		character
		position
		Repeat
		for each
		character
		in name

22