Russound ST2-XM2 manual Antenna Connections, XM Antenna, XM Signal Strength Mode

Page 12

ST2-XM2 SETUP AND CONNECTIONS

ANTENNA CONNECTIONS

XM Antenna

Connect the included XM antenna for XM recep- tion to the back panel of the XM module. The antenna comes with 20 feet of cable. If this length is not sufficient, there are aftermarket antenna kits available for custom lengths. Position the antenna near a south-facing window to receive the best signal from a satellite or terrestrial signal.

The antenna may also be attached to an exter- nal wall by sliding the slots on the back of the antenna onto four screws mounted on an exteri- or wall. Establish the best receiving position for the antenna before attaching it to the wall.

XM Signal Strength Mode

To test the XM reception, turn the unit on. When the XM radio is powered for the first time, the XM service will start playing XM Channel 1, a preview/promotional channel. Verify that Channel 1 is playing by pressing the Tune Up/Tune Down buttons. Enter Signal Strength Mode by pressing and holding the ST/MONO button on the ST2-XM2 front panel. The display shows one of the following:

GOOD SIGNAL Signal strength good MARGINAL SIG Signal strength marginal

POOR SIGNAL

Signal strength poor

NO SIGNAL

Loss of signal

Adjust the antenna until GOOD SIGNAL is dis- played. Press ST/MONO to exit Signal Strength Mode.

12VDC 1.25A

ANTENNA

ST2-XM2 Tuner

12

Image 12
Contents 800.967.2346 Important Safeguards Safety InstructionsTable of Contents RNET-enabled System IntroductionBOX Contents Component Guide ST2-XM2 Front PanelST2-XM2 Rear Panel XM TunerST2-RC Remote Control ST2-XM2 Setup and Connections Basic ConnectionsCAV6.6 Connections RCA CableSource Connections with CAi Series Controller/Amplifier ST2-KP Connections to ST2-XM2 Tuner Non-RNET SystemsXM Signal Strength Mode Antenna ConnectionsXM Antenna ST2-XM2 Operation XM Radio OverviewXM Radio Activation XM Radio DisplaysXM Radio Modes XM Radio ModesFor all XM Modes Preset default Mode Category Search Mode 1.CAT Search Now Playing Mode 2.NOW Playng Display Preference Mode 3.DSPLY PrefFront Panel Controls Front Panel OperationST2-RC Remote Control Operation Turning the unit on/offSaving Favorites ST2-KP Keypad Controls ST2-KP Keypad OperationSignal Strength Mode XM UNO-S2 Keypad Controls with CAV6.6/CAM6.6CAV6.6-UNO-S2 Keypad Operation MuteSelect XM Operating mode toggle UNO-LRC1 Remote Control with CAV6.6/CAM6.6 UNO-LRC1 Remote Control OperationPower Power managed by CAV6.6/CAM6.6 ST2 Tuner Setup Menu ST2 Chassis Setup MenuST2-XM2 Tuner Setup Menus ST2-XM2 Tuner ProgrammingUpdate Firmware Chassis Factory Initialization ChassisSystem Info Chassis ST2 Chassis Setup Procedures Tuner Setup Menu for XM Memory NameXM Setup Menu Bank Name Procedure Diagnostics Bank NameController ID Factory InitializationBackup and Restore Controller, Diagnostics, Factory InitializationSource Configuration Note Programming for CAV6.6 USEProgramming for CAM6.6 USE Technical Specifications ST2-XM2 Smart TunerWarranty & Repair 28-1170 03/23/05

ST2-XM2 specifications

The Russound ST2-XM2 is an advanced XM satellite radio tuner designed to cater to the discerning audio enthusiast. This versatile device not only delivers exceptional sound quality but also integrates seamlessly into custom audio/video systems. With its innovative features and technologies, the ST2-XM2 stands out as a remarkable choice for those looking to enhance their listening experience.

One of the most notable features of the ST2-XM2 is its ability to receive a wide range of XM satellite radio channels. With over 170 channels to choose from, users can enjoy an extensive selection of music, talk shows, sports broadcasts, and news programming. The tuner is equipped with a built-in XM receiver and a high-quality digital output, delivering superior audio performance that rivals traditional radio broadcasts.

The ST2-XM2 offers easy integration with existing home audio systems, thanks to its multiple output options. It features both analog and digital outputs, allowing users to connect the tuner to a variety of audio components. Additionally, the device supports RS-232 control, enabling seamless integration into larger home automation systems. This makes it an ideal choice for custom installations where system compatibility is crucial.

Another impressive characteristic of the Russound ST2-XM2 is its user-friendly interface. The tuner includes an intuitive LCD screen that displays relevant information, such as channel names, song titles, and artist details. Users can easily navigate through channels and create custom presets for their favorite stations, ensuring quick access to preferred programming.

The ST2-XM2 also comes equipped with advanced technologies aimed at enhancing the listening experience. The unit is designed to minimize interference and optimize signal clarity, providing consistent audio quality even in challenging environments. Additionally, it supports features like pause, rewind, and fast-forward, allowing users to enjoy their favorite content on their terms.

In terms of design, the Russound ST2-XM2 boasts a sleek and compact form factor, making it easy to fit into any media setup. The tuner is engineered for reliability, ensuring long-lasting performance for years to come. Its combination of features, technologies, and superior audio quality makes the Russound ST2-XM2 a top choice for satellite radio enthusiasts seeking a sophisticated and powerful audio solution. Whether used in a home theater, music system, or standalone setup, this XM tuner delivers an exceptional listening experience.