Russound ST2-XM2 manual Programming for CAV6.6 USE, Source Configuration Note

Page 32

ST2-XM2 TUNER PROGRAMMING

PROGRAMMING FOR CAV6.6 USE

NOTE: The CAV6.6 firmware must be version 2.00.01 or higher, and UNO-S2 firmware must be version 3.00.01 or higher to control the ST2-XM2 Tuner. Use the System Info Menu of the CAV6.6 to check the firmware version. If the firmware is not the proper revision as noted here, visit the Document Center at www.russound.com to obtain the latest version.

To Program the CAV6.6 to operate with the ST2-XM2 Tuner: (refer to the CAV6.6 Instruction Manual for details)

1.Enter the Setup Menu by pressing the Setup button on the side of the UNO-S2 keypad.

2.SOURCE SETUP will appear. Enter the Source Setup Menu by pressing the Play button on the UNO-S2 keypad.

3.BASIC SETUP will appear. Enter the Basic Setup Menu by pressing the Play button again.

4.SOURCE NUM will appear. Use + and - buttons to select the source number to which Tuner 1 (XM) is connected. Press the Play button to enter your choice.

5.SOURCE NAME will appear. Use + and - buttons to select the name for the source (e.g., Tuner 1 or XM). Press the Play button to enter your choice.

6.COMMAND TYPE will appear. Select PERIPHERAL from the list. Press the Play button to enter this choice.

7.SAVE CHANGES? appears. Select “Yes” and press the Play button to save changes.

8.SOURCE NUM appears again. Repeat steps 4 through 7 to configure the second tuner.

9.Press the Setup button three times to back out of the Installation Menu.

Source Configuration Note:

When the ST2-XM2 Tuner is used with the CAV6.6 or other RNET controller, it is configured as an RNET command type “Peripheral” and is connected via the RNET bus. This makes the tuner behave as a fully integrated device with UNO-S2 keypad support. Each tuner must be set up with a unique source number (1 - 6) or unassigned. An unassigned tuner is not controlled by the RNET bus.

Key Function Note:

When using the tuner with the CAV6.6-S2 system, do not reassign keypad and remote buttons for tuner control in the CAV6.6 Key Configuration Menu. When the tuner is assigned the “Peripheral” com- mand type in the CAV6.6 Setup Menu, key assignments and functions are automatically assigned and will operate as shown in the preceding UNO-S2 keypad and UNO-LRC1 remote control diagrams.

32

Page 31 Page 33
Image 32
Page 31 Page 33
Contents 800.967.2346 Important Safeguards Safety InstructionsTable of Contents RNET-enabled System IntroductionBOX Contents Component Guide ST2-XM2 Front PanelST2-XM2 Rear Panel XM TunerST2-RC Remote Control ST2-XM2 Setup and Connections Basic ConnectionsCAV6.6 Connections RCA CableSource Connections with CAi Series Controller/Amplifier ST2-KP Connections to ST2-XM2 Tuner Non-RNET SystemsXM Antenna XM Signal Strength ModeAntenna Connections ST2-XM2 Operation XM Radio OverviewXM Radio Activation XM Radio DisplaysFor all XM Modes XM Radio ModesXM Radio Modes Preset default Mode Category Search Mode 1.CAT Search Now Playing Mode 2.NOW Playng Display Preference Mode 3.DSPLY PrefFront Panel Controls Front Panel OperationSaving Favorites ST2-RC Remote Control OperationTurning the unit on/off ST2-KP Keypad Controls ST2-KP Keypad OperationSignal Strength Mode XM UNO-S2 Keypad Controls with CAV6.6/CAM6.6CAV6.6-UNO-S2 Keypad Operation MuteSelect XM Operating mode toggle UNO-LRC1 Remote Control with CAV6.6/CAM6.6 UNO-LRC1 Remote Control OperationPower Power managed by CAV6.6/CAM6.6 ST2 Tuner Setup Menu ST2 Chassis Setup MenuST2-XM2 Tuner Setup Menus ST2-XM2 Tuner ProgrammingSystem Info Chassis Update Firmware ChassisFactory Initialization Chassis ST2 Chassis Setup Procedures Tuner Setup Menu for XM Memory NameXM Setup Menu Bank Name Procedure Diagnostics Bank NameController ID Factory InitializationBackup and Restore Controller, Diagnostics, Factory InitializationSource Configuration Note Programming for CAV6.6 USEProgramming for CAM6.6 USE Technical Specifications ST2-XM2 Smart TunerWarranty & Repair 28-1170 03/23/05

ST2-XM2 specifications

The Russound ST2-XM2 is an advanced XM satellite radio tuner designed to cater to the discerning audio enthusiast. This versatile device not only delivers exceptional sound quality but also integrates seamlessly into custom audio/video systems. With its innovative features and technologies, the ST2-XM2 stands out as a remarkable choice for those looking to enhance their listening experience.

One of the most notable features of the ST2-XM2 is its ability to receive a wide range of XM satellite radio channels. With over 170 channels to choose from, users can enjoy an extensive selection of music, talk shows, sports broadcasts, and news programming. The tuner is equipped with a built-in XM receiver and a high-quality digital output, delivering superior audio performance that rivals traditional radio broadcasts.

The ST2-XM2 offers easy integration with existing home audio systems, thanks to its multiple output options. It features both analog and digital outputs, allowing users to connect the tuner to a variety of audio components. Additionally, the device supports RS-232 control, enabling seamless integration into larger home automation systems. This makes it an ideal choice for custom installations where system compatibility is crucial.

Another impressive characteristic of the Russound ST2-XM2 is its user-friendly interface. The tuner includes an intuitive LCD screen that displays relevant information, such as channel names, song titles, and artist details. Users can easily navigate through channels and create custom presets for their favorite stations, ensuring quick access to preferred programming.

The ST2-XM2 also comes equipped with advanced technologies aimed at enhancing the listening experience. The unit is designed to minimize interference and optimize signal clarity, providing consistent audio quality even in challenging environments. Additionally, it supports features like pause, rewind, and fast-forward, allowing users to enjoy their favorite content on their terms.

In terms of design, the Russound ST2-XM2 boasts a sleek and compact form factor, making it easy to fit into any media setup. The tuner is engineered for reliability, ensuring long-lasting performance for years to come. Its combination of features, technologies, and superior audio quality makes the Russound ST2-XM2 a top choice for satellite radio enthusiasts seeking a sophisticated and powerful audio solution. Whether used in a home theater, music system, or standalone setup, this XM tuner delivers an exceptional listening experience.
Top Page Image Contents