Russound ST2-XM2 UNO-S2 Keypad Controls with CAV6.6/CAM6.6, CAV6.6-UNO-S2 Keypad Operation, Mute

Page 21

ST2-XM2 OPERATION

UNO-S2 KEYPAD CONTROLS WITH CAV6.6/CAM6.6

CAV6.6-UNO-S2 Keypad Operation

NOTE: To control the ST2 Tuner through the UNO-S2 keypad, the tuner must be configured as a source using the CAV6.6/CAM6.6 program- ming steps.

Turning the unit on

The tuner is power managed by the CAV6.6 or other RNET-enabled controller. If the tuner is in standby mode, any button press of the UNO-S2 keypad will bring the tuner out of standby mode.

Selecting the desired tuner

On the UNO-S2 keypad, press to select

either Tuner 1 (XM1) or Tuner 2 (XM2) by choos-

ing the tuner’s preassigned source number.

Selecting an XM Mode

Push to toggle between XM modes.

Exiting an XM Mode

Press and release until EXIT is displayed to exit XM mode selection menu.

Selecting the desired channel

Use and for manual channel selection.

The channel will appear on the keypad and the

active tuner. To move quickly through the chan-

nels, press and hold either or for more than 1.5 seconds.

Signal Strength Mode (XM)

To check XM signal strength, press and hold

then release. The display shows the signal

strength rating. To exit, press again.

Selecting a Bank

To select a bank, press and hold for bank

up or for bank down. The bank’s name will be temporarily displayed on the UNO-S2.

Recalling a Memory Preset

Press and to scroll through the memo- ry presets for the selected bank. This procedure will step through all of the presets in the current bank, then loop back to start at the first one.

Only configured presets will be displayed.

Mute

Press to mute/unmute the tuner audio output.

21

Image 21
Contents 800.967.2346 Safety Instructions Important SafeguardsTable of Contents Introduction RNET-enabled SystemBOX Contents ST2-XM2 Front Panel Component GuideXM Tuner ST2-XM2 Rear PanelST2-RC Remote Control Basic Connections ST2-XM2 Setup and ConnectionsRCA Cable CAV6.6 ConnectionsST2-KP Connections to ST2-XM2 Tuner Non-RNET Systems Source Connections with CAi Series Controller/AmplifierXM Signal Strength Mode Antenna ConnectionsXM Antenna XM Radio Overview ST2-XM2 OperationXM Radio Activation XM Radio DisplaysXM Radio Modes XM Radio ModesFor all XM Modes Preset default Mode Category Search Mode 1.CAT Search Display Preference Mode 3.DSPLY Pref Now Playing Mode 2.NOW PlayngFront Panel Operation Front Panel ControlsST2-RC Remote Control Operation Turning the unit on/offSaving Favorites ST2-KP Keypad Operation ST2-KP Keypad ControlsUNO-S2 Keypad Controls with CAV6.6/CAM6.6 Signal Strength Mode XMCAV6.6-UNO-S2 Keypad Operation MuteSelect XM Operating mode toggle UNO-LRC1 Remote Control Operation UNO-LRC1 Remote Control with CAV6.6/CAM6.6Power Power managed by CAV6.6/CAM6.6 ST2 Chassis Setup Menu ST2 Tuner Setup MenuST2-XM2 Tuner Setup Menus ST2-XM2 Tuner ProgrammingUpdate Firmware Chassis Factory Initialization ChassisSystem Info Chassis ST2 Chassis Setup Procedures Memory Name Tuner Setup Menu for XMXM Setup Menu Bank Name Procedure Bank Name DiagnosticsController ID Factory InitializationController, Diagnostics, Factory Initialization Backup and RestoreProgramming for CAV6.6 USE Source Configuration NoteProgramming for CAM6.6 USE ST2-XM2 Smart Tuner Technical SpecificationsWarranty & Repair 28-1170 03/23/05

ST2-XM2 specifications

The Russound ST2-XM2 is an advanced XM satellite radio tuner designed to cater to the discerning audio enthusiast. This versatile device not only delivers exceptional sound quality but also integrates seamlessly into custom audio/video systems. With its innovative features and technologies, the ST2-XM2 stands out as a remarkable choice for those looking to enhance their listening experience.

One of the most notable features of the ST2-XM2 is its ability to receive a wide range of XM satellite radio channels. With over 170 channels to choose from, users can enjoy an extensive selection of music, talk shows, sports broadcasts, and news programming. The tuner is equipped with a built-in XM receiver and a high-quality digital output, delivering superior audio performance that rivals traditional radio broadcasts.

The ST2-XM2 offers easy integration with existing home audio systems, thanks to its multiple output options. It features both analog and digital outputs, allowing users to connect the tuner to a variety of audio components. Additionally, the device supports RS-232 control, enabling seamless integration into larger home automation systems. This makes it an ideal choice for custom installations where system compatibility is crucial.

Another impressive characteristic of the Russound ST2-XM2 is its user-friendly interface. The tuner includes an intuitive LCD screen that displays relevant information, such as channel names, song titles, and artist details. Users can easily navigate through channels and create custom presets for their favorite stations, ensuring quick access to preferred programming.

The ST2-XM2 also comes equipped with advanced technologies aimed at enhancing the listening experience. The unit is designed to minimize interference and optimize signal clarity, providing consistent audio quality even in challenging environments. Additionally, it supports features like pause, rewind, and fast-forward, allowing users to enjoy their favorite content on their terms.

In terms of design, the Russound ST2-XM2 boasts a sleek and compact form factor, making it easy to fit into any media setup. The tuner is engineered for reliability, ensuring long-lasting performance for years to come. Its combination of features, technologies, and superior audio quality makes the Russound ST2-XM2 a top choice for satellite radio enthusiasts seeking a sophisticated and powerful audio solution. Whether used in a home theater, music system, or standalone setup, this XM tuner delivers an exceptional listening experience.