AJ-44 Conveyor Direction Change Instructions

www.jacksonmsc.com

tor weldment. Once removed, set to the side along with its gasket.

Removing the hole cover weldment

22.Separate the rinse plumbing from the rest of the incoming plumbing by loosening the union. Ensure that the gasket on the bottom of the rinse injector stays with the assembly as you remove it.

28.Re-install the lower wash arm support bracket to the pawl bar support on the end of the tub opposite from where it was removed.

29.Re-install the upper and lower rinse arms. Reinstall the lower rinse arm support bracket.

30.Re-install the lower wash arm assembly, turning it 180B and locking it in place with the locking screw.

31.Re-install the pawl bar. Ensure that the pawl bar is placed so that when racks are placed in the unit, the pawl bar dogs fold down.

32.Re-install the upper wash arm assembly. If you performed all of the actions outlined in step 2, when you install it, it will be directly over the lower wash arm assembly.

33.Remove the heater box cover by unscrewing the four screws holding it on.

Loosening the union on the incoming plumbing

23.Remove the remaining half of the union from the incoming plumbing.

24.Remove the incoming water pressure regulator from the incom- ing plumbing and replace with the union half that was removed in step 23. Place the water pressure regulator on the end that the union half was removed from.

25.Place the removed rinse plumbing assembly (with the gasket) in the hole left open from when you removed the hole cover weld- ment in step 21. Tighten the two halves of the union together.

26.Place the hole cover weldment (with its gasket) over the hole from where the rinse plumbing assembly was originally installed. Tighten down with the locknuts.

27.Re-install the rinse manifold (with its gasket) by connecting it to the rinse injector weldment at its new location. Remove the locknut from the stud for the bracket down near the rack rails and then secure the bracket to the machine using the same lock nut.

Removing the heater box cover

1	2	3
1

Front of rack conveyor showing the conveyor

switches

	6	AJ-44 Conveyor Direction Change Instructions
	6	Revision A (03/30/2005)
		Revision A (03/30/2005)

AJ-44, Rack Conveyor Dishmachine specifications

The Jackson Rack Conveyor Dishmachine stands out as an essential tool in commercial kitchens, designed to streamline the dishwashing process while maintaining superior cleanliness and efficiency. This state-of-the-art machine is engineered specifically for high-volume workflows, making it a staple in restaurants, cafeterias, and other food service establishments.

One of its main features is the innovative rack conveyor system, which allows for continuous loading and unloading of dishes. This system eliminates bottlenecks in the cleaning process, significantly increasing throughput. The conveyor runs smoothly, allowing for an uninterrupted wash cycle that can handle a large volume of dishes in a short amount of time.

Additionally, the Jackson Rack Conveyor Dishmachine is equipped with advanced wash and rinsing technologies. The machine utilizes powerful spray arms strategically positioned to ensure optimal coverage and thorough cleaning. This multi-level spraying system ensures that every inch of dishware is sanitized, providing peace of mind regarding the cleanliness of the items served to customers.

Energy efficiency is a key characteristic of this dishmachine. With eco-friendly designs and technologies, it conserves both water and energy while still delivering outstanding cleaning performance. The unit boasts a low water consumption rate and advanced heat recovery systems that recycle energy, making it a sustainable choice for any establishment aiming to reduce its ecological footprint.

Another notable feature is the digital control panel, which allows operators to easily navigate through various wash cycles and settings. This user-friendly interface streamlines the operation, enabling quick adjustments to accommodate different types and sizes of dishware. The control panel also provides diagnostic functions to monitor performance and flag maintenance needs, ensuring that the machine operates at peak efficiency.

Durability is also a hallmark of the Jackson Rack Conveyor Dishmachine. Constructed with high-quality stainless steel, it withstands the rigors of a busy kitchen environment while resisting corrosion and wear. This robust design ensures longevity and reliability, reducing the total cost of ownership over its lifespan.

In summary, the Jackson Rack Conveyor Dishmachine combines efficiency, advanced technology, and durable construction to provide an exceptional dishwashing solution. Its innovative features make it an asset for any commercial kitchen, simplifying the dishwashing process while promoting cleanliness and sustainability.