After Maintenance Actions

Conveyor Switch Chart:

Unit	Switch #1	Switch #2	Switch #3
Direction	Switch #1	Switch #2	Switch #3
Direction

Left to Right	Wash Switch #1	Wash Switch #2	Rinse Switch

Right to Left	Rinse Switch	Wash Switch #2	Wash Switch
Right to Left	Rinse Switch	Wash Switch #2	#1
			#1

The chart above lists the conveyor switches and their functions, depending on the direction fo travel for the machine. As you can see, when you change the direction of the conveyor, you must also alter the way the conveyor switches operate.

There is no need to remove the switches, only to change the wiring inside the heater box.

www.jacksonmsc.com

Incoming plumbing assembly for a Left to Right machine

(note hole cover weldment in lower right corner)

Incoming plumbing assembly for a Right to Left machine

(note hole cover weldment in upper left corner)

Terminal board inside the heater box	35. Re-install the heater box cover.

34.Note: Before beginning any part of this maintenance evolution that deals with the wiring of the machine, ensure that it is per- formed by qualified technicians only. Always refer to the machine schematic, located inside the control box, for any questions.

Wash Switch #1 and the Rinse Switch need to have their wire posi- tions changed on the terminal board pictured above. Locate the gray/yellow wire for Wash Switch #1 (do not confuse it with the gray/yellow wire for Wash Switch #2) and the orange/yellow wire for the Rinse Switch. Exchange their positions on the terminal board.

35.Verify that the plumbing has been reassembled correctly and that the hole cover weldment has been replaced and none of the gaskets are torn or pinched as this could lead to leaking when the machine operates.

1.Reconnect the incoming water and drain lines and then restore power to the unit. Run the unit for at least 1/2 hour to ensure there are no leaks. Test the unit with an empty rack to ensure that it pulls the rack all of the way through the unit. If any problems arise you can contact Jackson Technical Service.

2.Replace the front dress panel once the unit is ready for service again.

SPECIAL NOTES

1.There is a possibility that you may be required to short- en or lengthen the conduit and wire lengths for the inlet solenoid on the rinse plumbing once it is moved. This work should be per- formed by qualified technicians who will do the work according to applicable local, state and national codes. Questions concerning this should be directed to Jackson Technical Service.

	AJ-44 Conveyor Direction Change Instructions	7
	Revision A (03/30/2005)	7
	Revision A (03/30/2005)

AJ-44, Rack Conveyor Dishmachine specifications

The Jackson Rack Conveyor Dishmachine stands out as an essential tool in commercial kitchens, designed to streamline the dishwashing process while maintaining superior cleanliness and efficiency. This state-of-the-art machine is engineered specifically for high-volume workflows, making it a staple in restaurants, cafeterias, and other food service establishments.

One of its main features is the innovative rack conveyor system, which allows for continuous loading and unloading of dishes. This system eliminates bottlenecks in the cleaning process, significantly increasing throughput. The conveyor runs smoothly, allowing for an uninterrupted wash cycle that can handle a large volume of dishes in a short amount of time.

Additionally, the Jackson Rack Conveyor Dishmachine is equipped with advanced wash and rinsing technologies. The machine utilizes powerful spray arms strategically positioned to ensure optimal coverage and thorough cleaning. This multi-level spraying system ensures that every inch of dishware is sanitized, providing peace of mind regarding the cleanliness of the items served to customers.

Energy efficiency is a key characteristic of this dishmachine. With eco-friendly designs and technologies, it conserves both water and energy while still delivering outstanding cleaning performance. The unit boasts a low water consumption rate and advanced heat recovery systems that recycle energy, making it a sustainable choice for any establishment aiming to reduce its ecological footprint.

Another notable feature is the digital control panel, which allows operators to easily navigate through various wash cycles and settings. This user-friendly interface streamlines the operation, enabling quick adjustments to accommodate different types and sizes of dishware. The control panel also provides diagnostic functions to monitor performance and flag maintenance needs, ensuring that the machine operates at peak efficiency.

Durability is also a hallmark of the Jackson Rack Conveyor Dishmachine. Constructed with high-quality stainless steel, it withstands the rigors of a busy kitchen environment while resisting corrosion and wear. This robust design ensures longevity and reliability, reducing the total cost of ownership over its lifespan.

In summary, the Jackson Rack Conveyor Dishmachine combines efficiency, advanced technology, and durable construction to provide an exceptional dishwashing solution. Its innovative features make it an asset for any commercial kitchen, simplifying the dishwashing process while promoting cleanliness and sustainability.

Direction

AFTER MAINTENANCE ACTIONS

SPECIAL NOTES

AJ-44, Rack Conveyor Dishmachine specifications