Jackson technical manual JPX-300NSU Technical Manual 7610-002-75-96 Rev. E 08/16/2005

Page 11

SECTION 2: INSTALLATION & OPERATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS

Jackson MSC Inc. provides technical support for all of the dishmachines detailed in this manual. We strongly recommend that you refer to this manual before making a call to our technical support staff. Please have this manual with you when you call so that our staff can refer you, if necessary, to the proper page. Technical support is available from 8:00 a.m. to 5:00 p.m. (EST), Monday through Friday. Technical support is not available on holidays. Contact technical support toll free at 1-888-800-5672. Please remember that technical support is available for service personnel only.

This equipment is not recommend for use with deionized water or other aggressive fluids. Use of deionized water or other aggressive fluids will result in corrosion and failure of materials and components. Use of deionized water or other aggressive fluids will void the manufacturer's warranty.

VISUAL INSPECTION: Before installing the unit, check the container and machine for damage. A damaged container is an indi- cator that there may be some damage to the machine. If there is damage to both the container and machine, do not throw away the container. The dishmachine has been inspected and packed at the factory and is expected to arrive to you in new, undam- aged condition. However, rough handling by carriers or others may result in there being damage to the unit while in transit. If such a situation occurs, do not return the unit to Jackson; instead, contact the carrier and ask them to send a representative to the site to inspect the damage to the unit and to complete an inspection report. You must contact the carrier within 48 hours of receiving the machine. Also, contact the dealer through which you purchased the unit.

UNPACKING THE DISHMACHINE: Once the machine has been removed from the container, ensure that there are no miss- ing parts from the machine. This may not be obvious at first. If it is discovered that an item is missing, contact Jackson imme- diately to have the missing item shipped to you.

LEVEL THE DISHMACHINE: The dishmachine is designed to operate while being level. This is important to prevent any dam- age to the machine during operation and to ensure the best results when washing ware. The unit comes with adjustable bullet feet, which can be turned using a pair of channel locks or by hand if the unit can be raised safely. Ensure that the unit is level from side to side and from front to back before making any connections.

PLUMBING THE DISHMACHINE: All plumbing connections must comply with all applicable local, state, and national plumb- ing codes. The plumber is responsible for ensuring that the incoming water line is thoroughly flushed prior to connecting it to any component of the dishmachine. It is necessary to remove all foreign debris from the water line that may potentially get trapped in the valves or cause an obstruction. Any valves that are fouled as a result of foreign matter left in the water line, and any expenses resulting from this fouling, are not the responsibility of the manufacturer.

CONNECTING THE DRAIN LINE: The JPX-300NSU machine is a pumped (pressure) drain capable of pumping waste water to a height of 24 inches from the floor to the kitchen’s drain system. The dishmachine is supplied with a 10 foot long hose that extends from the rear side of the machine. There must also be an air gap between the machine drain line and the floor sink or drain. If a grease trap is required by code, it should have a flow capacity of 12 gallons per minute.

WATER SUPPLY CONNECTION: Ensure that you have read the section entitled “PLUMBING THE DISHMACHINE” above before proceeding. Install the water supply line (1/2” ID pipe size minimum)

to the dishmachine line strainer using copper pipe. It is recommended that a water shut-off valve be installed in the water line between the main supply and the machine to allow access for service. The water supply line is to be capable of 20 A5 PSI “flow” pressure at the recommended temperature indicated on the data plate.

Do to areas where the water pressure fluctuates or is greater than the recommended pressure, it is recommended installing supplied water pressure regulator. Do not confuse static pressure with flow pressure. Static pressure is the line pressure in a “no flow” condition (all valves and services are closed). Flow pressure is the pressure in the fill line when the fill valve is opened during the cycle.

It is also recommended that a shock absorber (not supplied) be installed in the incoming water line. This prevents line hammer (hydraulic shock), induced by the solenoid valve as it operates, from causing damage to the equipment.

PLUMBING CHECK: Slowly turn on the water supply to the machine after the incoming fill line and the drain line have been installed. Check for any leaks and repair as required. All leaks must be repaired prior to placing the machine in operation.

JPX-300NSU Technical Manual

7610-002-75-96 Rev. E (08/16/2005))

5

Page 10 Page 12
Image 11
Page 10 Page 12
Contents For Jackson Model Technical ManualJPX-300NSU Manufacturers Warranty ONE Year Limited Parts & Labor WarrantyRevision Made Applicable Details Date ECN Nomenclature for the Model Covered in this Manual JPX-300NSUParts Section II. Installation & Operation InstructionsVII Electrical Schematics This page is Intentionally Left Blank Section Specification Information Operating Capacity RACKS/HOUR Minute Timer Operating CycleTemperatures Frame DimensionsUndercounters Specification Information DimensionsSection INSTALLATION/OPERATION Instructions JPX-300NSU Technical Manual 7610-002-75-96 Rev. E 08/16/2005 JPX-300NSU Technical Manual 7610-002-75-96 Rev. E 08/16/2005 Floor Front ViewInstallation & Operation Instructions Detergent Control Installation & Operation Instructions Section Preventative Maintenance Preventative Maintenance Section Troubleshooting Problem Water overflow from bottom of door Troubleshooting Section Common ProblemsProblem Rinse water not at required temperature range Section Service Procedures Preparation Service Procedures Rinse Solenoid Valve Repair Parts KITRemove the wire nuts from the wires and separate them Removing the valve bonnet After Maintenance Actions Set the cap to the side Service Procedures Vacuum Breaker Repair Parts KITRemoving the plunger Section Parts Section QTY Description Parts Section Electrical Panel AssemblyQTY Description Parts Section Switch Panel AssemblySwitch, ON/OFF Parts Section Kick Panel Assembly Parts Section Plumbing Assembly Adapter, 1/2 Ftg. x Male Copper Tube, 1/2 x 20 1/4 5700-011-38-83 4820-003-06-13 Parts Section Drain Valve Assembly QTY Description Parts Section Drain Plumbing Assembly QTY Description Parts Section Wash Motor to Wash TUB Assembly Parts Section Rinse Tank & Components Parts Section Door Assembly Parts Section Rinse ARM & Wash ARM Assemblies Rinse Arm AssemblyParts Section Miscellaneous Parts Parts Section FRAME, & Panel Components Section Electrical Diagrams JPX-300NSU Technical Manual 7610-002-75-96 Rev. E 08/16/2005 JPX-300NSU Technical Manual 7610-002-75-96 Rev. E 08/16/2005

JPX-300NSU specifications

The Jackson JPX-300NSU is an advanced self-defense tool that combines cutting-edge technology with user-friendly design, making it a reliable option for individuals seeking personal protection. This innovative device is not just a standard pepper spray; it incorporates unique features that enhance its functionality and effectiveness.

One of the standout characteristics of the JPX-300NSU is its propulsion system. Unlike traditional aerosol sprays, this device uses a pyrotechnic propellant to launch a pepper-based projectile at a high velocity, allowing for a range of up to 7.5 meters (approximately 25 feet). This extended range gives users the advantage of keeping an intruder at a safe distance while still effectively incapacitating them. The projectile disperses upon impact, creating a broad aerosol cloud that disorients an assailant.

The JPX-300NSU is designed for ease of use, featuring a simple, intuitive trigger mechanism that allows for quick deployment under stress. Its ergonomic grip ensures a comfortable hold, even in high-pressure situations. Additionally, the device is equipped with a safety lock to prevent accidental discharge, which is essential for ensuring user safety.

Another notable feature of the JPX-300NSU is its ability to shoot two cartridges in rapid succession. Each cartridge is pre-loaded with a potent pepper formula, which is known for its debilitating effects. The device comes with interchangeable cartridges, allowing users to select the specific formulation that suits their needs, whether it's a standard pepper spray or a more specialized formula with additional irritants.

The robust construction of the JPX-300NSU ensures durability and reliability. Its lightweight and compact design make it easily portable, fitting conveniently in a purse or pocket. This makes the device not only effective but also accessible for everyday carry.

Moreover, the JPX-300NSU is equipped with a clear viewing window that allows users to assess remaining contents, ensuring they are always aware of their device's readiness. This foresight can be crucial in potentially dangerous situations.

In conclusion, the Jackson JPX-300NSU is an innovative self-defense tool that blends cutting-edge technology with practical design. Its extended range, rapid-fire capability, and specialized cartridges make it a formidable option for personal protection, all while maintaining user safety and ease of use.
Top Page Image Contents