Preparation, Tools Required, Steps | Jackson Dishmachine Component

www.jacksonmsc.com

Many Jackson dishmachines are equipped with electrical solenoid valves to allow for automatic fill and rinse. These valves are designed to specific tolerances and design aspects that must be met in order to function properly.

Jackson offers repair kits for replacing some of the wear items associated with solenoid valves which will allow you to save money in that replacement of these parts can take place without removing the solenoid valve from the plumbing assembly.

The instructions provided here are for maintenance per- sonnel only. Unauthorized persons should not attempt any of the steps contained in these instructions.

Warning: many of the instructions and steps within this document require the use of tools. Only authorized per- sonnel should ever perform any maintenance procedure on the dishmachine!

PREPARATION

1.Power must be secured to the unit at the service break- er. Tag or lock out the service breaker to prevent accidental or unauthorized energizing of the machine.

2.Ensure that incoming water to the machine is secured either by use of a shut-off valve or disconnecting the incoming water line.

TOOLS REQUIRED

The following tools will be needed to perform this mainte- nance evolution:

1.Small flathead screwdriver

2.Medium flathead screwdriver

2.Needle nose pliers

3.5/16” nutdriver

4.Channel locks

5.12” pipe wrench

TIME REQUIRED

It is estimated that it will take (1) person twenty minutes to perform this task, not including all of the items indicated in the sec- tion entitled “PREPARATION”.

IMPORTANT NOTES

1.Read these instructions thoroughly before attempting this maintenance evolution. Become familiar with the parts and what actions need to be taken. This will save time in the long run!

2.The procedures demonstrated in this manual are shown being performed on an AJ-44 rack conveyor dishmachine. The actual maintenance steps, however, apply to any Parker style solenoid valve found on a Jackson dishmachine.

STEPS

1.Remove the top screw with the 5/16” nutdriver. Remove the screw and the data plate and set to the side.

Removing the top screw

2.With the top screw and data plate removed, grasp the solenoid coil and gently pull up. The coil should slide up, allowing you to remove it from the valve bonnet. If you are wanting to replace the coil, continue on with Step 3. If you are wanting to replace some of the internal components of the valve, proceed to step 12.

Removing the coil

3.NOTE: Replacing the solenoid coil requires working with the wiring of your machine. It is important that all wiring maintenance be performed by qualified personnel. Always verify the wiring steps presented in this instruction with the schematic that shipped with the unit. A current schematic can also be found in the unit’s instal- lation manual. Before beginning any step that involves working with wiring, ensure that the steps located in the section entitled “Preparation” have been performed. Power must be secured to the machine at the service breaker. Failure to do so could result in severe injury to maintenance personnel.

	2	Parker Style Solenoid Valve Repair Kit Instructions
	2	Revision A (04/15/2005)
		Revision A (04/15/2005)

Dishmachine Component specifications

Jackson Dishmachine Component is a leading solution in the commercial dishwashing industry, designed to meet the rigorous demands of restaurants, caterers, and foodservice operations. This component stands out for its robust performance, efficiency, and innovative technologies that streamline the dishwashing process.

One of the main features of the Jackson Dishmachine Component is its high-capacity design, allowing businesses to handle a substantial volume of dishes, pots, and utensils in a short period. Its rapid wash cycles significantly reduce labor time and increase productivity in fast-paced environments. Users can expect clean and sanitized dishware in just a few minutes, making it an essential tool in high-turnover settings.

In terms of technology, the Jackson Dishmachine Component integrates advanced monitoring systems that provide real-time data on machine performance. This ensures that operators are always aware of water temperatures, chemical concentrations, and operational efficiency. The machine features digital controls that are user-friendly, allowing staff to easily adjust settings based on the specific requirements of their operation.

Another notable characteristic of the Jackson Dishmachine Component is its energy-efficient design. The machine consumes less water and energy compared to traditional dishwashing systems, aligning with sustainability initiatives commonly pursued by modern businesses. This feature not only helps in reducing operational costs but also lessens the environmental impact, making it an eco-friendly choice.

Safety is another priority with the Jackson Dishmachine Component. Built with sturdy materials, this component is designed to endure the demanding environment of a commercial kitchen. It includes safety features like thermal protection and automatic shut-off mechanisms to prevent overheating, thereby enhancing long-term reliability.

Additionally, the Jackson Dishmachine Component offers versatility, as it can accommodate various rack sizes and types, allowing businesses to customize their washing processes according to their specific needs. This adaptability, combined with its effective cleaning capabilities, makes it a top choice among foodservice professionals.

In summary, the Jackson Dishmachine Component embodies efficiency, innovation, and safety, making it an invaluable asset for any foodservice operation seeking to improve their dishwashing processes while maintaining high standards of cleanliness and sustainability.