Removing the valve bonnet

www.jacksonmsc.com

to remove the valve in order to perform this and any further steps. Be careful not to damage the plumbing assembly. Only use the pipe wrench enough to where you can spin the valve bonnet off with your hand.

13.Slowly remove the valve bonnet. Note: The spring for the plunger is located directly under the bonnet and may come free if you are not careful. Remove the plunger, spring and valve bonnet and place to the side.

Removing the O-ring

14.Remove the O-ring and inspect it. If it has any tears or cuts or excessive flat spaces, it should be replaced.

15.Examine the threads for the valve bonnet. Check them for scor- ing or signs of damage. Take a cloth and clean them out to remove any foreign particles that might get lodged in the threads and cause a leak. Severely damage threads should not be repaired; instead it is recommended that the entire valve should be replaced. These instructions do not provide information on replacing the solenoid valve.

16.Note: Even though an O-ring may not appear damaged, it is a good idea to go ahead and replace it if you have a new one. This will help ensure that your valve remains leak-free in the future!

Removing the diaphragm

17.Remove the diaphragm retainer and then the diaphragm itself. Many problems associated with a solenoid valve can be traced to a clogged pilot port in the diaphragm.

Pointing out the extension hole

18.As indicated in the photo above, the extension hole can become clogged. If it is difficult to clean out, you can use a heated straight pin to push through the hole. The center hole, the pilot port, must also be clear. If the diaphragm is torn or bent in any way, it must be replaced.

Diaphragm showing (1) pilot port and (2) extension hole

	4	Parker Style Solenoid Valve Repair Kit Instructions
	4	Revision A (04/15/2005)
		Revision A (04/15/2005)

Dishmachine Component specifications

Jackson Dishmachine Component is a leading solution in the commercial dishwashing industry, designed to meet the rigorous demands of restaurants, caterers, and foodservice operations. This component stands out for its robust performance, efficiency, and innovative technologies that streamline the dishwashing process.

One of the main features of the Jackson Dishmachine Component is its high-capacity design, allowing businesses to handle a substantial volume of dishes, pots, and utensils in a short period. Its rapid wash cycles significantly reduce labor time and increase productivity in fast-paced environments. Users can expect clean and sanitized dishware in just a few minutes, making it an essential tool in high-turnover settings.

In terms of technology, the Jackson Dishmachine Component integrates advanced monitoring systems that provide real-time data on machine performance. This ensures that operators are always aware of water temperatures, chemical concentrations, and operational efficiency. The machine features digital controls that are user-friendly, allowing staff to easily adjust settings based on the specific requirements of their operation.

Another notable characteristic of the Jackson Dishmachine Component is its energy-efficient design. The machine consumes less water and energy compared to traditional dishwashing systems, aligning with sustainability initiatives commonly pursued by modern businesses. This feature not only helps in reducing operational costs but also lessens the environmental impact, making it an eco-friendly choice.

Safety is another priority with the Jackson Dishmachine Component. Built with sturdy materials, this component is designed to endure the demanding environment of a commercial kitchen. It includes safety features like thermal protection and automatic shut-off mechanisms to prevent overheating, thereby enhancing long-term reliability.

Additionally, the Jackson Dishmachine Component offers versatility, as it can accommodate various rack sizes and types, allowing businesses to customize their washing processes according to their specific needs. This adaptability, combined with its effective cleaning capabilities, makes it a top choice among foodservice professionals.

In summary, the Jackson Dishmachine Component embodies efficiency, innovation, and safety, making it an invaluable asset for any foodservice operation seeking to improve their dishwashing processes while maintaining high standards of cleanliness and sustainability.