II Installation, Damage During Shipment

THIS HOT PLATE MAY NOT BE ALTERED, MODIFIED OR CHANGED IN ANY WAY.

The State of California enacted the California Safe drinking water and Toxic Enforcement Act of 1986, (Prop.65), which “prohibits any person in the course of doing business from knowingly and intentionally exposing any individual to a chemical known to the State of California to cause cancer or reproductive toxicity without first giving clear and reasonable warning to such individuals.” The Governor’s Scientific Advisory Panel added carbon monoxide to the list of hazardous chemicals known to cause reproductive harm.

In order to establish full compliance with Proposition 65, we attached a yellow warning label to each gas fired hot plate manufactured by Keating of Chicago, Inc.

Carbon monoxide would not be present in concentrations that would pose a “significant risk” to the consumer when the equipment is installed, operated and maintained as follows:

Installed under a properly designed operating exhausting good.

Connected to the type of gas for which the hot plate is manufactured.

Pressure regulator is installed in the appliance and adjusted for the manifold pressure marked on the serial plate.

Adequate air supply to the appliance.

In-line pressure regulator, not supplied by Keating, must be installed outside the appliance.

The equipment is operated in the manner intended using the proper utensils.

Keep the equipment clean and have it checked periodically.

Burner air adjustments, mechanical maintenance and repairs must be performed by qualified service personnel.

If the equipment is not installed, operated and maintained in accordance with the above, concentrations of carbon monoxide in excess of the established limits could be present in the kitchen environment.

ALL PERSONNEL IN THE WORK PLACE WHO MAY BE SUBJECT TO ANY EXPOSURE OF CARBON MONOXIDE MUST BE WARNED OF SUCH POSSIBLE EXPOSURE. THIS WARNING SHOULD BE CONVEYED IN A MANNER SO THAT IT IS CLEARLY UNDERSTOOD BY THE EMPLOYEE, AND THE EMPLOYEE SHOULD BE ASKED IF IN FACT HE OR SHE UNDERSTANDS THE CORRECT METHOD OF OPERATION OF THE EQUIPMENT AND THAT A RISK OF EXPOSURE EXISTS IF THE EQUIPMENT IS OPERATED IMPROPERLY.

WARNING

IF NOT INSTALLED, OPERATED AND MAINTAINED IN ACCORDANCE WITH THE MANUFACTURER’S INSTRUCTIONS, THIS PRODUCT COULD EXPOSE YOU TO SUBSTANCES IN FUEL OR IN FUEL COMBUSTION WHICH CAN CAUSE DEATH OR SERIOUS ILLNESS AND WHICH ARE KNOWN TO THE STATE OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.

II INSTALLATION

This hot plate MUST be installed, inspected, and serviced by qualified and/or certified and/or licensed service personnel – you may void your Keating warranty if installation is not completed per current local, national and Keating specifications. Contact your dealer for assistance.

DAMAGE DURING SHIPMENT

The hot plate has been assembled, tested and inspected at the factory. Upon arrival, the complete hot plate should be checked for any damage that may have occurred during shipment.

The carrier is responsible for all damage in transit whether visible or concealed. Do not pay for the freight bill until the hot plate has been thoroughly checked for damage. If concealed damage is found later, contact the carrier immediately to file a claim.

What to do if equipment arrives damaged:

VISIBLE LOSS OR DAMAGE – Be certain to note this on the freight or express receipt and have it signed by the delivery person.

FILE CLAIM FOR DAMAGES IMMEDIATELY – Regardless of extent of damage.

CONCEALED LOSS OR DAMAGE – If damage is noticed when equipment is unpacked, notify the freight company immediately, and file a “concealed damage claim”. This MUST be done immediately. Be sure to retain the shipping container for inspection.

Keating does not assume responsibility for Loss OR Damage incurred in transit.

INSTALLATION

Installation must conform with local codes or, in absence of local codes, with current National Fuel Gas Code ANSI Z223.1/NFPA 54, Natural Gas Installation Code CAN/CGA-B149.1 or Propane Installation Code CAN/CGA-B149.2. When pressure

MG-4, MG-2 specifications

The Keating Of Chicago MG-2 and MG-4 are standout models in the realm of high-performance ultra-light aircraft, showcasing cutting-edge technology and engineering. These aircraft are particularly noted for their innovative design and impressive performance, catering to both recreational pilots and aviation enthusiasts.

The MG-2 is an impressive two-seat aircraft, designed with a focus on agility and efficiency. It features a sleek composite airframe, which not only reduces weight but also enhances durability. One of its main characteristics is its low stall speed, allowing for safe landings and takeoffs in various conditions. Equipped with a state-of-the-art engine, the MG-2 offers remarkable fuel efficiency while delivering a responsive flying experience. The cockpit is ergonomically designed, providing an intuitive interface for the pilot, complete with advanced avionics that ensure navigation and communication remain seamless during flight.

On the other hand, the MG-4 brings a more spacious, four-seat configuration to the lineup, making it a versatile option for families or group outings. This model retains the premium build quality of the MG-2 while expanding on its capacity and range. Key features include a higher payload capacity and increased fuel tank volume, enabling longer journeys without compromising comfort. The MG-4's cabin is designed for passenger comfort, with ample legroom and modern amenities that enhance the flying experience.

Both aircraft utilize advanced materials, including carbon fiber composites, to optimize structural integrity while minimizing weight. This focus on materials translates into superior performance, with both models offering enhanced speed, climb rates, and overall handling.

One of the standout technologies incorporated in both the MG-2 and MG-4 is the fly-by-wire control system, which enhances maneuverability and simplifies handling, making these aircraft accessible to both novice and experienced pilots alike. This modern system improves responsiveness and provides critical data feedback in real-time, ensuring that pilots maintain optimal control.

In summary, the Keating Of Chicago MG-2 and MG-4 represent the pinnacle of modern ultralight aviation technology, with their strong emphasis on safety, efficiency, and passenger comfort. Whether for training, recreation, or cross-country flights, these models are designed to deliver an unmatched flying experience, further solidifying their place in the aviation landscape.