Russound instruction manual PRC -1 Remote Control, Using the PRC -1 with the PR-4Zi

Peripheral Devices

PRC -1 REMOTE CONTROL

The Russound PRC-1 remote control is prepro- grammed to operate more than 1,000 audio and video components, including the PR-4Zi. Set it up by simply punching in a three-digit code that matches your equipment. The PRC-1 also has the ability to learn new functions, allowing you to customize it and update it as you add new equipment. The PRC-1 operates up to eight different audio and video com- ponents in a home entertainment system.

The PRC-1 controls only the local zone you are in.

USING THE PRC -1 WITH THE PR-4Zi

To activate the PRC-1 for use with the PR-4Zi:

1.Turn on the PR-4Zi using its front-panel switch.

2.On the PRC-1, press the AUX and MUTE buttons simultaneously, then release.

3.Point the PRC-1 toward the PR-4Zi and press the three-digit code 0-8-1.

4.On the PRC-1, press the AUX button again to store the code.

5.Henceforth, pressing the AUX button on the PRC- 1 accesses all the preprogrammed codes for the PR-4Zi.

All the functions available on the PCK keypad are also available on the PRC-1. NOTE: The PRC-1 can turn on the local zone by pressing the POWER but- ton, and turn off that zone by pressing the MUTE button.

Figure 19 – PRC-1 Preprogrammed & Learning Remote Control

AUD CD DVD AUX

SAT TV VCR CBL

POWER

VOL CH

MUTE T/V

GUIDE					MENU
			PAUSE
	R		SEL		F
	E		PLAY		•
	W				F
			STOP		PRE.
EXIT
					CH
1		2		3	FAV
TUNER		CD		TAPE	SLEEP
4		5		6	INFO
VID 1		VID 2		DVD	PRO.L
7		8		9	NEXT
ALL ON		ALL OFF		PRESET	3.CH
+10		0		ENTER	ALT
	PIP			SHIFT	TEST
TUNER Ld	REAR		CENTER DELAY SURR
TAPE	BASS		TREBLE		CENTER
M1		M2		M3	M4
SYSTEM					SYSTEM
ON					OFF

LIGHT

PRC-1

PROGRAMMABLE REMOTE CONTROL

18