JBL SDP-40HD manual Tilt EQ, To control the tilt EQ from the remote control

SDP-40HD Audio Controls

TILT EQ -3.0 to +3.0dB

AUDIO CONTROLS TILT EQ

Controls the amount of tilt equalization applied to the Main Zone audio output connectors labeled Front L/R, Center, LFE, and Subwoofer L/R. This parameter setting affects the entire frequency spectrum with a hinge point at 1kHz. As the setting increases, frequencies higher than 1kHz are boosted while frequencies lower than 1kHz are simultaneously cut. As the setting decreases, frequencies higher than 1kHz are cut while frequencies lower than 1kHz are simultaneously boosted. The graph shown at the right indicates the frequency response of all TILT EQ parameter settings.

To control the tilt EQ from the remote control:

Press the Shift button:

•Press the GAME button to increase the TILT EQ parameter setting in 0.2dB increments.

•Press the AUX button to decrease the TILT EQ parameter setting in 0.2dB increments.

•Press the OSD button to set the BASS, TREBLE, and TILT EQ parameters to +0.0dB.

TILT EQ

The TILT EQ parameter controls the amount of tilt equalization applied to the Main Zone audio output connectors labeled Front L/R, Center, LFE, and Subwoofer L/R.

4-5