JBL SDP-40HD manual Remote only, Program Operation Parameters ON, OFF

Setup JBL

REMOTE ONLY						ON, OFF
SETUP	TRIGGERS	TRIGGER 1	OR	TRIGGER 2	REMOTE ONLY

Configures the selected trigger output connector for remote operation. Select the ON setting to configure the selected connector for remote operation. Select the OFF setting to configure the selected connector for program operation. Refer to the Program Operation Parameter description below for more information.

When configured for remote operation, the connector labeled 1 can be activated and deactivated with the MODE + and – buttons when the Zone 2 command bank is activated, and the connector labeled 2 can be activated and deactivated with the MODE + and – buttons when the Record Zone command bank is activated.

Note:

When the REMOTE ONLY parameter is set to ON, all TRIGGER SETUP menu program operation parameter settings are ignored.

PROGRAM OPERATION PARAMETERS ON, OFF

SETUP TRIGGERS TRIGGER 1 OR TRIGGER 2 Program Operation Parameter

Configures the selected trigger output connector for program operation when the REMOTE ONLY parameter is set to OFF. Select the ON setting to associate the selected connector with the corresponding input(s) or listening mode(s).

When configured for program operation, the connector is activated and deactivated when the associated inputs or listening modes are activated and deactivated.

Note the following:

•Trigger output connectors can be associated with individual Main Zone inputs and listening modes.

•Connectors can be associated with both the Zone 2 and Record Zone inputs, but cannot be associated with Zone 2 only or the Record Zone only.

•Connectors can be associated with multiple inputs and listening modes at the same time.

Note:

When the CUSTOM menu RESET MODE option is selected to restore the factory-default version of the selected listening mode, the corresponding TRIGGER SETUP menu program operation parameter is automatically set to OFF.

3-58