SDP-40HD

Basic Operation

standard 5.1-channel Dolby Digital source recorded without Dolby. Digital Surround EX encoding is detected. The SDP-40HD cannot automatically detect Dolby Digital Surround EX encoding in non-flagged input sources.

HDCP STATUS

ACTIVE, INACTIVE, ERROR

Indicates the current HDCP status of the media present at the active HDMI input.

HDMI CONNECTOR

1-6

Indicates the HDMI connector selected as the active HDMI input.

INPUT

Indicates the selected input (for example, DVD1).

INPUT TYPEANLG, BYPASS, PCM, ---

Indicates the input source that is present. When the parameter setting is ANLG, a 2-channel analog audio source is present and the ADVANCED menu ANALOG BYPASS parameter is set to OFF. When the parameter setting is BYPASS, a 2-channel analog audio source is present and the ANALOG BYPASS parameter is set to ON. When the parameter setting is PCM, a 2-channel digital audio source is present. When the parameter setting is ---, an unknown digital audio source is present.

MIX ROOM

SMALL, LARGE

Indicates the size of the mixing room that was used during the mixing process. When the parameter setting is LARGE, you should set the RE-EQUALIZER parameter to ON for THX listening modes.

MODE

Indicates the activated listening mode (e.g., L7 FILM).

SAMPLE RATE

44.1kHz, 48kHz, 88.2kHz, 96kHz

Indicates the sample rate of the input source that is present.

SURR MIX LVL

+0.0dB, -3.0dB, -6.0dB

Indicates the relative surround channel level that was used during the mixing process.

VERT RATE

60Hz, 50Hz, 59.94Hz, ---

Indicates the vertical timing rate for the active video format being carried on HDMI.

VID FMT

720P, 1080I, ---

Indicates the active video format of the media present at the active HDMI input.

WORD LENGTH

16 bits, 20 bits, 24 bits

Indicates the word length of the audio data present in the input signal.

2-28

Page 40
Image 40
JBL SDP-40HD manual Hdcp Status, Hdmi Connector, Input, MIX Room, Mode, Sample Rate, Surr MIX LVL, Vert Rate, Vid Fmt