SDP-40HD

Mode Adjust

2CH BYPASS

MODE ADJUST 2CH BYPASS

OUTPUT LEVELS

MODE ADJUST Listening Mode OUTPUT LEVELS

This listening mode sends 2-channel analog audio input signals to the Main Zone audio output connectors labeled Front L/R with no internal processing.

The 2CH BYPASS listening mode is automatically activated whenever a 2-channel analog source is present and the MAIN ADV

OUTPUT LEVELS

CENTER

+0dB

SIDE L/R

+0dB

REAR L/R

+0dB

SUB L/R

+0dB

LFE

+0dB

Opens the OUTPUT LEVELS menu, which is used to adjust output levels for the Main Zone audio output connectors labeled Center, Subwoofer L/R, LFE, Side L/R, and Rear L/R.

menu ANALOG BYPASS parameter is set to ON. The 2CH BYPASS listening mode is not available when a digital source is present and the MAIN ADV menu INPUT SELECT parameter is set to AUTO.

Pressing the remote control SHIFT then 2CH buttons toggles the MAIN ADV menu ANALOG BYPASS parameter between ON and OFF.

Note:

Speaker crossover settings, speaker distances, and audio controls (tone) are not available when the 2CH BYPASS listening mode is activated.

The OUTPUT LEVELS option does not appear on listening mode menus when the selected listening mode does not accommodate multichannel output signals. Instead, an output-specific parameter appears. For example, the MONO listening mode OUTPUT LEVELS menu includes a SUB L/R LVL parameter.

Parameter

Default Setting

Possible Settings

 

 

 

CENTER

+0dB

OFF, -30 to +12dB

 

 

 

SIDE L/R

+0dB

OFF, -30 to +12dB

 

 

 

REAR L/R

+0dB

OFF, -30 to +12dB

 

 

 

SUB L/R (LVL)

+0dB

OFF, -30 to +12dB

 

 

 

LFE

+0dB

OFF, -30 to +12dB

See page 5-35 for detailed parameter descriptions.

5-33

Page 141
Image 141
JBL SDP-40HD manual 2CH Bypass, Output Levels