JBL SDP-40HD manual Speaker Setup Parameters

SDP-40HD Setup

SETTING CROSSOVER POINTS (continued)

SPEAKER SETUP PARAMETERS

SETUP SPEAKERS CUSTOM SETUP or SETUP

SPEAKERS

SYNTHESIS 7CH SETUP

The table below indicates the speaker setup parameters for configuring all possible settings for speaker setup parameters in the CUSTOM SETUP and SYNTHESIS 7CH SETUP menus.

Speaker setup parameters perform the same function regardless of the selected speaker setup. When a parameter setting is adjusted on

one menu, the corresponding parameter setting is automatically adjusted on the other menu. For example, when a SYNTHESIS 7CH speaker setup is selected, the speaker setup parameters on the CUSTOM SETUP menu are set to THX 80Hz.

		CUSTOM SETUP Menu	SYNTHESIS 7CH SETUP Menu
Parameter	Default Setting	Possible Setting	Default Setting	Possible Settings
FRONT L/R*	80Hz	FULL, FULL + SUB, 30Hz to 120Hz, THX 80Hz	80Hz	80Hz
CENTER*	80Hz	FULL, FULL + SUB, 30Hz to 120Hz, THX 80Hz, NONE	80Hz	80Hz
SIDE L/R*	80Hz	FULL, FULL + SUB, 30Hz to 120Hz, THX 80Hz, NONE	80Hz	80Hz
REAR L/R	80Hz	FULL, FULL + SUB, 30Hz to 120Hz, THX 80Hz, NONE	80Hz	80Hz, NONE
SUB L/R*	MONO	MONO, STEREO, NONE	MONO	MONO
SUB XOVER*	80Hz	FULL, 30Hz to 120Hz, THX 80Hz	80Hz	80Hz
LFE*	OFF	ON, OFF	ON	ON
THX ULTRA2 SUB	OFF	ON, OFF	OFF	ON, OFF
BGC	N/A†	ON, OFF	N/A†	ON, OFF
ASA	APART	APART, CLOSE, TOGETHER	APART	APART, CLOSE, TOGETHER

* These parameters cannot be adjusted on the SYNTHESIS 7CH SETUP menu.

† When the THX ULTRA2 SUB parameter is set to OFF, the BGC parameter is not available (N/A).

3-31