SDP-40HD

Setup

CALIBRATING SPEAKER DISTANCES & OUTPUT LEVELS

The SDP-40HD offers calibration of speaker distances and output levels. Calibration helps to ensure accurate output signal arrival time and level at the primary listening position. However, it is not a substitute for proper speaker placement.

Before calibrating speaker distances and output levels:

Set crossover points for the Main Zone audio output connectors. Setting crossover points afterwards could invalidate calibrated output levels (the CUSTOM or THX SETUP menu can be used to set crossover points).

Eliminate extraneous noise in the listening space, including conversation, air conditioners, and sounds that filter in through open doors and windows.

Move or remove people or objects blocking the path between the microphones or SPL meter and the speakers.

SPEAKER CALIBRATION PARAMETERS

The table on the next page indicates the speaker calibration parameters that can be used to set speaker distances and output levels for the speakers connected to the corresponding Main Zone audio output connectors. These parameters are available on the speaker distance and output level menus shown throughout this section.

SPEAKER DISTANCE PARAMETERS +0.0 to 30.0ft or 12.0m

Reflect the distance between the primary listening position and the speaker connected to the corresponding Main Zone audio output connector.

OUTPUT LEVEL PARAMETERS

-18.0db to +12.0dB

Reflect the output level of signals sent to the speaker connected to the corresponding Main Zone audio output connector.

3-39

Page 79
Image 79
JBL SDP-40HD manual Calibrating Speaker Distances & Output Levels, Speaker Calibration Parameters, Output Level Parameters