JBL SDP-40HD manual Setup, Input Select Parameter Settings

SDP-40HD								Setup
INPUT SELECT PARAMETER SETTINGS
	DIGITAL				ANALOG			AUTO
The SDP-40HD sends the digital audio from			The SDP-40HD sends the analog audio from					The SDP-40HD toggles between sending digital or
the assigned input to the Main Zone audio			the assigned input to the Main Zone audio					analog audio input to the Main Zone audio output
output connectors. The assigned analog			output connectors. The assigned digital audio					connectors based on the input source that is
audio input connector is ignored.			input connector is ignored.					present.
The digital audio input connectors are			Note the following:					Example:
compatible with PCM (44.1, 48, 88.2,			•	The	SDP-40HD	automatically sets	the	• The SDP-40HD selects the assigned digital
and 96kHz), Dolby Digital, and DTS(-ES)
				INPUT SELECT parameter to ANALOG				audio input when a compatible digital
sources . The digital		audio input
				when no digital audio input connector is				source is present. The SDP-40HD does not
connectors are not compatible with
				assigned.				select the assigned analog audio input
MPEG or MP3 sources.
			•	The	INPUT	SETUP ANALOG	IN	when a compatible digital source is
								present.
Note the following:				parameter can assign an analog audio
								• The SDP-40HD selects the assigned analog
				input connector for the selected input.
•	The SDP-40HD automatically sets							audio input connector when no compatible
	the INPUT SELECT parameter to							digital source is present.
	DIGITAL when no analog audio							• The SDP-40HD selects the assigned analog
	input connector is assigned.
								audio input connector when an analog
•	The INPUT SETUP	DIGITAL IN						source, such as an SACD, is present.
	parameter can assign a digital audio							Note the following:
	input connector for the selected
	input.							• The SDP-40HD automatically sets the MAIN
								ADVANCED INPUT SELECT parameter to
								AUTO when both digital and analog audio
								input connectors are assigned.
								• Use the AUTO setting for components, such as
								DVD/SACD players, that generate both digital
								and analog output signals.

3-21