JBL SDP-40HD manual ZONE2 in & Record, DIGITAL, ANLG, Dmix

SDP-40HD Setup

When set to FAST, the SDP-40HD will mute when a period of continuous digital silence is detected. Once valid audio is received, the SDP-40HD will configure its processing and deactivate mute. This prevents audible digital noise from occurring during digital audio signal changes. For example, the SDP-40HD will briefly mute when FORMAT DETECT is set to FAST and the digital audio stream changes from PCM to DTS.

Note

The Format Detection parameter does not apply to the Dolby PLIIx family of listening modes. Use the Logic 7 family of listening modes as an alternative when using Format Detection.

ZONE2 IN & RECORD IN

SETUP INPUTS DVD1 ZONE2 IN

OR

DIGITAL, ANLG, DMIX

RECORD IN

Controls the interaction of the digital and analog audio input connectors assigned to the current Zone 2 and Record Zone inputs. The table on the next page describes ZONE2 and RECORD IN parameter settings.

CAUTION!

When the ZONE2 or RECORD IN parameter is set to DIGITAL or ANLG, the SDP-40HD recognizes some DTS encoded sources as audio signals (not data signals) and outputs loud digital noise from the Zone 2 or Record Zone audio output connectors.

3-23