JBL SDP-40HD Assigning HDMI, Audio and Video Input Connectors, Hdmi, Copyright protection system

Setup JBL

ASSIGNING HDMI, AUDIO AND VIDEO INPUT CONNECTORS

The SDP-40HD has 12 inputs, to which any (depending on compatibility) of its 6 HDMI, 13 digital audio, 8 analog audio, 2 composite video, 3 S-video, or 4 component video input connectors can be assigned. The table below indicates the INPUT SETUP menu parameters that can be used to assign audio and video input connectors. The ANLG IN LVL parameter can be used to adjust 2-channel and 5.1 analog audio input levels for the selected input.

Parameter	Possible Settings
HDMI IN	HDMI-1 to 6, NONE
DIGITAL IN	HDMI AUDIO, COAX-1 to 6, OPTICAL-1 to 6,
	AES/EBU, NONE
ANALOG IN	ANALOG-1 to 8, 5.1 ANLG (6-8), NONE
ANLG IN LVL	AUTO, -18dB to +12dB
VIDEO IN	COMPOSITE-1 to 2, S-VIDEO-1 to 3, NONE
COMPONENT IN	COMPONENT-1 to 4, VIDEO
Note:

The digital audio input connectors (including HDMI) are compatible with PCM (44.1, 48, 88.2, and 96kHz), Dolby Digital and DTS(-ES) sources. These connectors are not compatible with MPEG, MP3 or MP4.

HDMI IN HDMI-1 TO 6, NONE

SETUP INPUTS DVD1 HDMI IN

Opens the HDMI IN menu, to assign an HDMI (High Definition Multimedia Interface) input connector to the selected input.

The relationship between the HDMI inputs and HDMI analog and digital outputs depends upon whether the HDMI IN parameter is set to HDMI-1 to 6 or NONE, and also the setting of the DIGITAL IN parameter. Refer to the table on page 3-7 during the following explanation.

When HDMI IN is set to HDMI 1 to 6, and DIGITAL IN is set to HDMI AUDIO, then only HDMI video (no audio) is active on the HDMI output connector. The received HDMI audio is processed by the SDP-40HD and is available on the analog audio outputs. See page 3-8 for details on the DIGITAL IN menu selections.

When HDMI IN is set to NONE, and DIGITAL IN is set to HDMI AUDIO, then the COAX-1 connector is automatically assigned to DIGITAL IN in place of any previously assigned HDMI connectors. No audio or video is available on the HDMI output connector.

When one of the HDMI inputs is selected and DIGITAL IN is set to a parameter other than HDMI AUDIO, then both HDMI audio and video are passed through the SDP-40HD (no processing occurs) to the HDMI output connector.

Copyright protection system

The SDP-40HD supports HDCP (High-bandwidth Digital Content Protection). HDCP is a copy protection technology that comprises data encryption and authentication of associated equipment connected through HDMI. All equipment connected to the SDP -40HD through HDMI must sup port HDCP if th e HDCP-protected content is to be displayed properly.

3-6