JBL SDP-40HD manual To set the CAL Noise parameter, To set the L/R Limiter parameter

Setup JBL

CAL NOISE ON, OFF

SETUP SPEAKERS LEVELS CALIBRATION BASS PEAK LIMITERS CAL NOISE

Determines whether bass peak limiters are set with an internal or external calibration source.

To set the CAL NOISE parameter:

•Select ON to activate an internal calibration noise signal to set bass peak limiters.

•Select OFF to deactivate the internal calibration noise signal.

Setting bass peak limiters with the calibration noise set to OFF requires an external calibration source such as an audio calibration disc.

L/R LIMITER				ON, OFF
SETUP	SPEAKERS	LEVELS CALIBRATION	BASS PEAK LIMITERS	L/R LIMITER

Limits low frequency signals sent to the subwoofer or redirected to other speakers.

To set the L/R LIMITER parameter:

•Select ON to restrict the output level of the low frequency signals to the L/R LIMIT ADJ parameter setting.

•Select OFF to allow an unrestricted signal output level, regardless of the L/R LIMIT ADJ parameter setting.

L/R LIMIT ADJ				75 to 120dB
		LEVELS CALIBRATION	BASS PEAK LIMITERS	L/R LIMITER ADJ
SETUP	SPEAKERS

Specifies the output level restriction applied to the Subwoofer L/R output connectors, and to other Main Zone audio output connectors to which low frequency signals are redirected.

To set the L/R LIMIT ADJ parameter:

1.Select the L/R LIMIT ADJ parameter. The parameter initially sets to 75dB.

2. Press the	or	arrow button to change the parameter
value.

The selected output level restriction is applied when the L/R LIMITER parameter is set to ON.

LFE LIMITER				ON, OFF
SETUP	SPEAKERS	LEVELS CALIBRATION	BASS PEAK LIMITERS	LFE LIMITER

Limits low frequency signals sent to the LFE subwoofer or redirected to other speakers.

To set the LFE LIMITER parameter:

•Select ON to restrict the output level of the low frequency signals to the LFE LIMIT ADJ parameter setting.

•Select OFF to allow an unrestricted signal output level, regardless of the LFE LIMIT ADJ parameter setting.

3-46