JBL SDP-40HD manual Restoring FACTORY-DEFAULT Settings, To restore factory-default settings

SDP-40HD Troubleshooting & Maintenance

RESTORING FACTORY-DEFAULT SETTINGS

When factory-default settings are restored, all parameters and values that the owner has defined are restored to their factory-default settings. Before restoring factory-default settings, you should record all of your current settings.

FACTORY SETTINGS	FACTORY SETTINGS
EXIT	HAVE BEEN RESTORED
RESTORE DEFAULTS	PRESS ANY KEY
	TO RESTART

To restore factory-default settings:

1.Select one of the following options to record user defined settings:

•Use the Configuration Tool to download current SDP-40HD settings to a personal computer (PC). The configuration tool is available at www.jblsynthesis.com

•Record the settings you have defined on the installation worksheet that begins on page A-19.

2.If the SDP-40HD is not in standby mode, press the Standby Button.

3.When standby mode is activated, press the Standby Button again, then quickly press and hold the Mute button until the FACTORY SETTINGS menu shown above opens on the on-screen and front panel displays.

Note:

The Mute button must be pressed within 2 seconds of deactivating standby mode. Otherwise, the “MUTE ON” message will appear on the on-screen and front panel displays. If this occurs, too much time has passed. Press the Standby button and begin again at step 3.

4. Press the remote control	or	arrow button to highlight
RESTORE DEFAULTS, then press the			arrow button. (To close
the FACTORY SETTINGS menu without restoring factory default
settings, highlight EXIT, then press the			arrow button.)

The FACTORY SETTINGS message appears on the front panel and on-screen displays. When this message appears, press a front panel or remote control button to restart the SDP-40HD.

6-5