JBL SDP-40HD manual Mode Buttons, Mode Family Selection Buttons, Input Source Button

Mode Adjust JBL

MODE BUTTONS

Use the front panel and remote control Mode buttons to audition listening modes with the current Main Zone input source. Press the Mode + or – button to scroll up or down through the available listening modes for the current Main Zone input source. For example, if a 2-channel source is present in the Main Zone, the Mode buttons can be used to audition 2-channel listening modes.

Scrolling occurs in the order shown on the MODE ADJUST menu. The selected listening mode appears in the bottom-left corner of the Main Zone two-line status. The selected listening mode is automatically activated when scrolling stops.

MODE FAMILY SELECTION BUTTONS

The remote control mode family selection buttons select a listening mode within the corresponding mode family. Pressing a mode family selection button activates the most appropriate listening mode for the current Main Zone input source. For example, pressing the L7 button while a 2-channel source is present in the Main Zone activates the L7 FILM listening mode.

The table below indicates the listening modes associated with each mode family selection button.

		Input Source
Button	2-Channel	5.1 Dolby Digital	DTS(-ES)	5.1mc
	N/A**†	THX*	DTS(-ES) THX*	5.1mc THX*

DOLBY PLII MOVIE†

DD 5.1 PLII MOV*

N/A**

N/A**

L7 FILM

5.1 L7 FILM

DTS(-ES) L7 FILM*

5.1mc L7 FILM

L7 TV

5.1 L7 TV

N/A**

N/A**

DTS Neo:6 CIN††

N/A**

DTS(-ES)*

N/A**

L7 MUSIC

5.1 L7 MUSIC

DTS(-ES) L7 MUSIC*

5.1mc L7 MUSIC

*These listening mode names differ depending on the current input source, speaker setup, and parameter settings. Refer to the Listening Mode Descriptions section that begins on the next page for more information. For 5.1 systems with only side or rear speakers (but not both), pressing the button loads the DOLBY DIGITAL mode.

**The MODE SELECTION NOT AVAILABLE message appears on the on-screen and front panel displays when the selected listening mode family does not offer a listening mode for the current Main Zone input source.

†When a 7-speaker configuration is in use, the Dolby PLIIx variant of this mode is loaded.

††The MODE SELECTION NOT AVAILABLE message appears on the on-screen and front panel displays if the input has a sampling rate of 96kHz. This includes analog inputs converted to 96kHz.

5-4