JBL SDP-40HD manual REC PWR on, MAX Volume

SDP-40HD				Setup
VOLUME CONTROL SETUP (continued)
REC PWR ON				LAST LVL, -80 to +6dB
	SETUP	VOLUME CONTROLS	REC PWR ON

Sets the Record Zone volume level for the output connector labeled Var to the selected value when the Record Zone is activated. When LAST LVL is selected, the SDP-40HD sets the Record Zone volume level to the last volume level that was selected in the Record Zone during the previous operating session.

When the Record Zone Var audio output connector is connected to a recording device, set the volume to +0dB to achieve appropriate recording levels. Adjusting the Record Zone volume level will affect the recording.

MAX VOLUME -80 to +6dB

SETUP VOLUME CONTROLS MAX VOLUME

Limits the volume to the MAX VOLUME parameter value if you attempt to adjust the volume above that level.

3-55