JBL SDP-40HD manual 1mc 2-CHAN, 1a Bypass, Option/Parameter

Mode Adjust JBL

5.1mc 2-CHAN

MODE ADJUST 5.1mc 2-CHAN

This mode downmixes 5.1-channel input signals into 2-channel Logic 7-encoded output signals. It sends these signals to the front speakers and the subwoofer. It is recommended for recording purposes, particularly for recording from a DVD-A or multi-channel SACD player to a CD-R or another 2-channel recording format.

Parameter	Default Setting	Possible Settings
CENTER MIX	+0dB	-25 to +5dB
SURROUND MIX	+0dB	-5 to +5dB
CNTR DLY SAMPLES	+0	-127 to +127
MASTER LEVEL	+0dB	-5 to +5dB
LFE MIX	+0.0dB	-20.0 to +0.0dB
SUB L/R LVL	+0dB	OFF, -30 to +12dB
CUSTOM	Refer to page 5-34

See page 5-35 for detailed parameter descriptions.

5.1a BYPASS

MODE ADJUST 5.1a BYPASS

•Designed for playback of 5.1-channel sources, such as DVD-A or SACD players.

•Sends the 5.1-channel audio input connector directly to the Main Zone volume control and audio output connectors as shown on page 1-5and page 3-47.These signals receive no internal processing.

•When both side and rear speakers are present, surround channel signals are sent in parallel to the side and rear speakers. To configure a 5-channel speaker setup, set the OUTPUT LEVELS menu SIDE L/R or REAR L/R parameter to OFF to deactivate the associated surround speakers.

•The 5.1a BYPASS listening mode is automatically activated whenever a 5.1-channel analog source is present and the MAIN ADV menu ANALOG BYPASS parameter is set to ON. The 5.1a BYPASS listening mode is only available for 5.1-channel analog sources.

•Pressing the remote control SHIFT then 2CH buttons toggles the MAIN ADV menu ANALOG BYPASS parameter between ON and OFF.

Option/Parameter

OUTPUT LEVELS	Refer to page 5-33
CUSTOM	Refer to page 5-34

See page 5-35 for detailed parameter descriptions.

Note:

Speaker crossover settings, speaker distances, and audio controls (tone) are not available when the 5.1a BYPASS listening mode is activated.

5-32