JBL SDP-40HD manual When 5 Stereo & 5.1 Anlg is selected, Input Connectors Output Connectors

Setup JBL

5 STEREO & 5.1 ANLG

SETUP

REAR PANEL CONFIG

5 STEREO & 5.1 ANLG

Select the 5 STEREO & 5.1 ANLG option to configure the analog audio input connectors as five stereo and one 5.1-channel connectors.

When 5 STEREO & 5.1 ANLG is selected:

•The 5.1-channel connector should only be used with 5.1-channel analog sources such as DVD-As and SACDs.

•The analog audio input connectors labeled 1, 2, 3, 4, and 5 are configured as stereo connectors.

•The analog audio input connectors labeled 6, 7, and 8 are configured as 5.1-channel connectors.

•Input sources that were assigned to the stereo connectors labeled 6, 7, and 8 are reassigned to conform to the 5.1-channel configuration.

•The 5.1-channel input is sent to the Main Zone audio output connectors as indicated in the table below.

Input Connector(s)	Output Connector(s)
(L) & (R)	Front L/R
(C)	Center
(SUB)	Subwoofer L/R & LFE
(LS) & (RS)	Side L/R & Rear L/R

3-48