JBL SDP-40HD manual Video OSD, Component OSD, Hdmi OSD, HDMI-1 to HDMI-6, None

Setup JBL

CONFIGURING ADVANCED INPUT SETTINGS (continued)

S-VIDEO OSD 4:3 ON, OFF

SETUP INPUTS DVD1 MAIN ADVANCED S-VIDEO OSD 4:3

Controls the on-screen display aspect ratio when the display device is connected to a Main Zone S-video output connector. Aspect ratio refers to the shape of the picture or the display device screen. A 4:3 aspect ratio is almost square. A 16:9 aspect ratio, often referred to as widescreen, is almost twice as wide as it is high. When ON, the on-screen display appears in a 4:3 aspect ratio regardless of the incoming video input signal. When OFF, the on-screen display appears in the same aspect ratio as the incoming video input signal.

The on-screen display appears horizontally stretched across the display device screen when all of the following conditions are met:

•The S-VIDEO OSD (4:3) parameter is OFF.

•An anamorphic video input signal is present.

•A 16:9 display device (widescreen) is connected to an S-video output connector.

COMPONENT OSD ON, OFF

SETUP INPUTS DVD1 MAIN ADVANCED COMPONENT OSD

Controls the appearance of the on-screen display when the display device is connected to the component video output connector. When ON, the display device shows the on-screen display as a 480i video signal on a full blue screen background. To minimize viewing distractions, the two-line status does not appear in the on-screen display. When OFF, the display device does not show the on-screen display, including the two-line status.

When the ON-SCREEN DISPLAY menu BACKGROUND parameter is OFF, the display device using the component video output

connector shows the on-screen display only when composite or S-video is converted and output through the component video connectors (INPUT SETUP menu VIDEO IN parameter is set to COMPOSITE VIDEO or S-VIDEO and COMPONENT IN is set to VIDEO).

HDMI OSD			HDMI-1 TO HDMI-6, NONE
SETUP	INPUTS	DVD1	MAIN ADVANCED	HDMI OSD

Controls the appearance of the on-screen display when the display device is connected to the HDMI output connector. When ON, the display device shows the on-screen display as a video signal overlayed on the incoming HDMI video. If the SETUP > DISPLAYS > ON-SCREEN DISPLAY > BACKGROUND parameter is set to ON, or the INPUT SETUP menu DHMI IN parameter is set to NONE, the OSD will display on a full blue screen background.

If the current input also has an active incoming S-video or composite video signal, the OSD on both the HDMI and S- video/composite main zone outputs will display as white characters on the screen. Otherwise the HDMI OSD will display in full color.

FORMAT DETECT				NORMAL, FAST
SETUP	INPUTS	DVD1	MAIN ADVANCED	FORMAT DETECT

Provides a means of preventing audible digital noise from occurring during digital audio signal changes. Digital sources typically output a short period of silence when switching between sources. The FORMAT DETECT parameter controls how the SDP-40HD reacts when it detects silence in the digital audio stream.

When set to NORMAL, the SDP-40HD will not mute when silence is detected. This setting is appropriate for most sources.

3-22