Drain hose
1.Connect the drain hose by inserting the extension drain hose to the drain connection port tightly.
2.Insulate the extension drain hose, then fix it with a cable tie or a tape.
Piping material | Vinyl chloride(Inner | |
diameter ø13mm) | ||
| ||
Insulation | Foamed polyethylene |
Drain hose 
Drain hole for duct (polypropylene)
Insulation (foamed 
polyethylene ) 
Connecting drain hose
ENGLISH
3. Connect drain hose to the outdoor unit since water will be generated during heating or defrost operation. (Drain hose for outdoor unit should be purchased separately.)
Extension hose
Hose connection part
Drain plug
• As the draining is of natural drain type, make the drain hose direct downward. CAUTION • Fix the drain hose tightly to prevent any water leakage.
•If there is any foreign substance in the drain plate, it may clog the drain pipe. Therefore, be sure to remove the foreign substance inside after installation.
•Do not extend the drain hose.
Fixing the indoor unit
fIfthe indoor unit is installed on unstable place, it may shake or fall down. To prevent these accidents, you must fix the top of the indoor unit tightly with fixing brackets.
Wall installation |
| Corner Installation |
Example 1 | Example 2 |
45
PAC MIRAGE |