Indoor and outdoor connection wiring
ffWhen connecting the wiring harness between the indoor and outdoor unit, align the outdoor side and the indoor side with the terminal board No.
❋❋When the wiring harnesses of the indoor and outdoor unit are not properly connected, it may cause trouble. Be careful not to allow the indoor and outdoor wirings and power lines to get in contact with the service valve of the refrigerant system or to the pipe without an insulation.
AP55M0✴ Series
Using 3poles ELCB(Earth Leakage Circuit Breaker)
1.Remove the cover of electric box on side panel of the outdoor unit.
2.Connect the electric input wires [L1(R), L2(S), L3(T)] to each terminal [L1(R), L2(S), L3(T)] of the electric box on the outdoor unit respectively. (Input wires are purchased by the user separately.)
3.Connect the electric wires to each terminal on the indoor and outdoor unit respectively.
| Control box |
|
| Indoor unit | Outdoor Unit |
| Knife switch or | |
|
| |
|
| automatic circuit |
|
| breaker |
Earth | Earth | ON |
| Earth | R S T N |
|
| Earth |
| Indoor and outdoor | Power cable |
| connection wire | (Purchase separately) |
ENGLISH
AP55M1✴ Series
Using 3poles ELCB(Earth Leakage Circuit Breaker)
1.Remove the cover of electric box on side panel of the outdoor unit.
2.Connect the electric input wires [L1(R), L2(S), L3(T)] to each terminal [L1(R), L2(S), L3(T)] of the electric box on the outdoor unit respectively. (Input wires are purchased by the user separately.)
3.Connect the electric wires to each terminal on the indoor and outdoor unit respectively.
Indoor unit | Outdoor Unit |
Knife switch or
automatic circuit
breaker
Earth |
|
Earth | ON |
R S T N
NFB
Indoor and outdoor connection wire
Earth
Power cable
(Purchase separately)
35
PAC MIRAGE |