JBL SDP-40HD manual Specifications

Appendix JBL

SPECIFICATIONS

HDMI Input & Output Connectors

HDMI Inputs	•	6 HDMI Type A (19-pin) connectors
HDMI Output	•	1 HDMI Type A (19-pin) connector

HDMI Performance mmmmm

Video Resolutions	•	480i, 480p, 720p, 1080i (resolutions dependent on the
		capability of the HDMI display connected to the
		SDP-40HD HDMI output connector)
Audio Sample Rates	•	44.1kHz, 48kHz, 88.2kHz, 96kHz

Audio Input & Output Connectors

Analog Audio Inputs	• 8 stereo (RCA) or 5 stereo and one 5.1-channel connectors
Digital Audio Inputs	•	6 S/PDIF coaxial (RCA), 6 S/PDIF optical, and 1 AES/EBU
		(XLR) connectors
	•	Coaxial and optical input connectors conform to IEC-
		958, S/PDIF standards
	•	Accepts 44.1, 48, 88.2 and 96kHz sample rates
	•	Accepts 16-24 bits PCM audio, Dolby Digital, DTS and
		DTS-ES discrete data formats
Main Zone Audio	• 12 unbalanced (RCA) and 12 balanced (XLR, SDP-40HD
Outputs		Balanced only) connectors for Front L/R, Center, LFE,
		Subwoofer L/R, Side L/R, and Rear L/R, and Auxiliary L/R
Zone 2 Audio Outputs	•	2 unbalanced (RCA, 1 fixed and 1 variable output level)
		stereo connectors and 1 balanced stereo connector
		(XLR, variable output level, SDP-40HD Balanced only)
Record Zone Audio	•	2 unbalanced (RCA, 1 fixed and 1 variable output level)
Outputs		stereo connectors
	•	1 S/PDIF coaxial (RCA) and 1 S/PDIF optical connector
		(in parallel)

Main Zone Audio Performance

A/D Conversion	•	24-bit, 96kHz, dual-bit ΔΣ architecture
D/A Conversion	•	24-bit, 44.1 to 192kHz, multi-bit ΔΣ architecture
Frequency Response	•	10Hz to 20kHz, +0.1dB/-0.25dB, -0.75dB at 40kHz, refer-
		ence 1kHz
THD + Noise	• Below 0.003% at 1kHz, maximum output level
Dynamic Range	• 108dB minimum, 111dB typical, 22kHz bandwidth
Signal-to-Noise Ratio	•	108dB minimum, 111dB typical, 22kHz bandwidth
Input Sensitivity	•	200mVrms (2Vrms for maximum output level) at 0dB
		input gain
Input Impedance	•	100kΩ in parallel with 150pF
Output Level	•	150mVrms typical, 6Vrms maximum (RCA connectors)
	• 300mVrms typical, 12Vrms maximum
	• Maximum value with full-scale input signal and volume at
		+12dB
Output Impedance	•	100Ω in parallel with 150pF (RCA connectors)
	•	50Ω in parallel with 150pF (XLR connectors, SDP-40HD
		Balanced only)

Zone 2 & Record Zone Audio Performance

A/D Conversion	•	24-bit, 44.1 to 96kHz, dual-bit ΔΣ architecture (Record
		Zone only)
D/A Conversion	•	24-bit, 44.1 to 192kHz, multi-bit ΔΣ architecture
Frequency Response	•	10Hz to 20kHz, +0.1dB/-0.25dB, -0.75dB at 40kHz, refer-
		ence 1kHz
THD + Noise	• Below 0.005% at 1kHz, maximum output level
Dynamic Range	• 105dB minimum, 108dB typical, 22kHz bandwidth
Signal-to-Noise Ratio	•	105dB minimum, 108dB typical, 22kHz bandwidth
Input Sensitivity	•	200mVrms (4Vrms for maximum output level)
Input Impedance	•	100kΩ in parallel with 150pF

A-2