SDP-40HD

Basic Operation

Input Connector

Output Connector

 

 

(L) & (R)

Front L/ R

 

 

(C)

Center

 

 

(SUB)

Subwoofer L/R & LFE

 

 

(LS) & (RS)

Side L/R and Rear L/R

REMOTE CONTROL OVERVIEW

The SDP-40HD remote control provides full operation of the SDP-40HD, including commands such as menu navigation that are not available from the front-panel. The command matrix, beginning on page 2-1100, indicates the commands that remote control buttons perform when each command bank is active. The numbered items in the matrix correspond with the remote control illustrations.

OPERATION CONSIDERATIONS

The following factors can improve or impede remote control operation.

Note the following before operating the SDP-40HD remote con- trol:

The remote control must be in line of sight with the front- panel IR receiver. Eliminate obstructions between the remote control and the IR receiver. The remote control may become unreliable if strong sunlight or fluorescent light shines on the IR receiver.

For optimal performance, position the remote control at a 30 degree angle no more than 17 feet (5m) from the SDP-40HD. Placing the SDP-40HD inside a smoked glass cabinet will reduce the remote control range.

Remote controls for different components can interfere with one another. Avoid using remote controls for different compo- nents at the same time.

Remote control batteries should be replaced as needed.

2-9

Page 21
Image 21
JBL SDP-40HD manual Remote Control Overview, Operation Considerations, Input Connector Output Connector, Sub