JBL SDP-40HD manual Re-Equalizer, Rear DLY Offset, Rolloff, Side L/R, Size, Rear L/R, Sound Stage

Mode Adjust JBL

LISTENING MODE MENU OPTION & PARAMETER DESCRIPTIONS (continued)

RE-EQUALIZER ON, OFF

Simulates high frequency rolloffs that occur in movie theaters. When set to ON, the SDP-40HD applies a high frequency filter. When set to OFF, the SDP-40HD does not apply a high frequency filter. You should set this parameter to ON for film sources, as many films are mixed for movie theaters and might sound too bright when played back in home theaters without re-equalization. Available in L7 FILM, L7 TV, Dolby PLII + THX, Dolby PLIIx + THX,

5.1L7 FILM, 5.1 L7 TV, THX ULTRA2, THX SurEX, THX, DTS(-ES) L7 FILM, 5.1 L7 MUSIC, DTS(-ES) L7 MUSIC, DTS THX ULTRA2, DTS(- ES) THX, 5.1mc L7 FILM, 5.1mc L7 MUSIC, 5.1mc THX ULTRA2, 5.1mc THX SurEX, and 5.1mc THX modes.

REAR DLY OFFSET OFF, 1 to 30ms

Increases the perceived depth of the listening space by delaying the arrival time of rear speaker signals. You should increase the setting when using side and rear speakers that are located close together or when a greater sense of depth is desired in the listening space. Available in All Logic 7 modes and PANORAMA mode.

ROLLOFF 500Hz to 20.0kHz, OFF

Simulates the absorption of high frequencies in a real space. You should begin with a low setting to simulate high frequency absorptive spaces. Available in NIGHTCLUB, CONCERT HALL, CHURCH, and CATHEDRAL modes.

SIDE L/R -30 to +12dB, OFF

Controls the level of the Side L/R audio output connectors in the Main Zone. Available in all except 2-CHANNEL, MONO, 5.1 2-CHANNEL, 5.1 MONO, DTS(-ES) 2-CHAN, 5.1mc 2-CHAN, and 2CH BYPASS modes.

SIZE 4 to 20 or 30m

Adjusts the length of the listening space within a 4m to 20m or 30m range (depending on the listening mode). Increase the size of the space to increase the reverb effect. Available in NIGHTCLUB, CONCERT HALL, CHURCH, and CATHEDRAL modes.

REAR L/R -30 to +12dB, OFF

Controls the output level of the audio output connector labeled Rear L/R. Available in all except 2-CHANNEL, MONO, 5.1 2-CHANNEL, 5.1 MONO, DTS(-ES) 2-CHAN, 5.1mc 2-CHAN, and 2CH BYPASS modes.

RESET MODE

Restores the factory default version of the selected listening mode, restoring all listening mode menu parameters to their factory default settings. Available in all modes.

CAUTION!

Setting the BASS RT, MID RT and SIZE parameters to a high value may produce undesirable or damaging audio.

SOUND STAGE FRONT, NEUTRAL, REAR

Dynamically controls the relative balance of the audio output connectors. When set to FRONT, the Side L/R and Rear L/R output levels are attenuated by 6dB, shifting the perceived balance of the sound field to the front of the listening space. When set to NEUTRAL, the Side L/R and Rear L/R output levels are slightly attenuated by 3dB, shifting the perceived balance of the sound field to the center of the

5-40