JBL SDP-40HD manual Product Registration Installation Considerations

SDP-40HD Getting Started

PRODUCT REGISTRATION

Please register the SDP-40HD Digital Controller within 15 days of purchase. Register online at www.jbl.com. Retain the original sales receipt as proof of warranty coverage.

INSTALLATION CONSIDERATIONS

The SDP-40HD requires special care during installation to ensure optimal performance. Pay particular attention to instructions below and to other precautions that appear throughout this user guide.

DO install the SDP-40HD on a solid, flat, level surface such as a table or shelf. The SDP-40HD can also be installed in a standard 19-inch equipment rack using an optional rack-mount kit available from an authorized dealer.

DO select a dry, well-ventilated location out of direct sunlight.

DO NOT expose the SDP-40HD to high temperatures, humidity, steam, smoke, dampness or excessive dust. Avoid installing the SDP-40HD near radiators and other heat-producing appliances.

DO NOT install the SDP-40HD near unshielded TV or FM antennas, cable TV decoders, or other RF-emitting devices that might cause interference.

DO NOT place the SDP-40HD on a thick rug or carpet, or cover the SDP-40HD with a cloth, as this might prevent proper cooling.

DO NOT place the SDP-40HD on a window sill or any location exposed to direct sunlight.

DO NOT obstruct the front-panel IR receiver window. The remote control must be in line of sight with the IR receiver for proper operation.

DO NOT install the SDP-40HD on a surface that is unstable or unable to support all four feet, unless it is installed in an equipment rack.

DO NOT stack the SDP-40HD directly above heat-producing equipment such as a power amplifier.

CAUTION!

Before moving the SDP-40HD, power the unit off using the rear-panel power switch and unplug the power cord from the wall outlet.

1-5