JBL SDP-40HD manual Party, Channel, Mono Logic, Parameter Settings

SDP-40HD Mode Adjust

PARTY

MODE ADJUST PARTY

This mode, designed for playback of stereo sources, sends the left channel to Front, Side, and Rear Left channels and the right channel to Front, Side and Rear Right channels, and sums the Left and Right for the center. It is recommended for background music.

Parameter	Settings
OUTPUT LEVELS	Refer to page 5-33
CUSTOM	Refer to page 5-34

See page 5-35 for detailed parameter descriptions.

2-CHANNEL

MODE ADJUST 2-CHANNEL

This mode, designed for playback of stereo sources, sends the left and right channels to the Front L/R and Subwoofer channels. It is recommended for two-speaker playback with subwoofers and for comparison purposes with other listening modes.

Parameter	Default Setting	Possible Settings
SUB L/R LVL	+0dB	OFF, -30dB to +12dB
CUSTOM	Refer to page 5-34

See page 5-35 for detailed parameter descriptions.

MONO LOGIC

MODE ADJUST MONO LOGIC

This mode, designed for playback of mono sources, uses proprietary Lexicon reverb algorithms to realistically expand mono sources to use all channels. This dramatically increases the perceived width and sense of envelopment of the listening space.

Parameter	Default Setting	Possible Settings
EFFECT LVL	-9dB	-12dB to +6dB
ACADEMY FILTER	ON	ON, OFF
SURR ROLLOFF	3.1kHz	500Hz to 20.0kHz, OFF
OUTPUT LEVELS	Refer to page 5-33
CUSTOM	Refer to page 5-34

See page 5-35 for detailed parameter descriptions.

Note:

When the remote control Shift command bank is activated, pressing the TVL button activates the MONO LOGIC listening mode for 2-channel sources.

5-15