JBL SDP-40HD Zone 2 Audio Output Connectors, Record Zone Video Output Connectors, IR in Connector

SDP-40HD Basic Operation

Component video output is available when a component, composite, or S-video source is present.

Note:

The video outputs that incorporate the on-screen display (OSD) can also display the two-line status. However, to view the two-line status through the component output, it must be configured to convert and display composite or S-video. See “COMPONENT IN” on page page 12.

CAUTION!

Never make or break connections to the SDP-40HD unless the SDP-40HD and all associated components are powered off.

7 ZONE 2 AUDIO OUTPUT CONNECTORS

Provides analog audio output from Zone 2. Two sets of stereo connectors are available. The connectors labeled “Fix” pass audio at fixed output levels. The connectors labeled “Var” pass audio at variable output levels and include a built-in volume control.

8 RECORD ZONE VIDEO OUTPUT CONNECTORS

Provides video output from the Record Zone. Two composite video connectors and two S-video connectors are available. These connectors can be used to connect a monitor or video recording device.

9 IR IN CONNECTOR

Accepts input of IR signals from infrared distribution equipment. One 3.5mm jack that accepts a stereo plug (Tip/Ring/Sleeve connection) or mono plug (Tip/Sleeve connection) is available.

10 REMOVABLE ACCESS PANEL

Covers the expansion slot, which is reserved for emerging technologies.

11 POWER SWITCH

The Power Switch disconnects power from the AC Input Connector

(12)to the product. The I and O positions represent “on” and “off” status, respectively. When the SDP-40HD is powered on, the front- panel Standby button or remote control On button can be used to activate and deactivate standby mode. When the SDP-40HD is powered off, standby mode is not available.

12 AC INPUT CONNECTOR

Provides power to the SDP-40HD through the supplied power cord.

13 RECORD ZONE AUDIO OUTPUT CONNECTORS

Provides analog and digital audio output from the Record Zone. Two stereo connectors labeled Audio L/R output analog audio. The connector labeled “Fix” passes audio at a fixed output level. The connector labeled “Var” passes audio at variable output levels and includes a built-in volume control. Two S/PDIF connectors (one coaxial and one optical) output digital audio.

These connectors can be used to connect a recording device. When the Record Zone audio output connector labeled Var is connected to a recording device, you should set the volume to +0dB to achieve appropriate recording levels. See “REC PWR ON” on page page 55 for more information.

2-7