II. Installation Instructions
A. Polaris 380 Components
The Polaris 380 box contains:
1.Sweep Hose with Sweep Hose Scrubber
2.Head Float
3.All Purpose Bag
4.Cleaner Head
5.Complete Feed Hose with
6.Quick Disconnect
7.Universal Wall Fitting with Pressure Restrictors (one red and one blue)
|
| 5 | |
| 3 |
| |
| 2 |
| |
| 6 | 7 | |
1 | 4 | ||
|
B. Possible Pool Connections
1. Dedicated Return Line
A
2. Over-the-deck Installation
If the pool does not have a dedicated return line, the Polaris can be installed by obtaining an
C. Installing the Universal Wall Fitting
1.Turn on the filtration pump and flush out the plumbing line.
2.Remove the universal wall fitting from the quick disconnect. The universal wall fitting has a blue pressure restrictor installed to
Pool Wall |
Universal |
Wall Fitting |
Universal Wall |
Fitting Pressure |
Restrictor |
Quick |
Disconnect |
Pressure Relief |
Valve |
help the Polaris operate at its optimum level of efficiency. Screw the universal wall fitting and the blue restrictor into the return line by hand.
3.Turn the quick disconnect into the universal wall fitting clockwise and pull away to secure.
4.Turn the quick disconnect by hand to tighten the universal wall fitting; do not overtighten. Once the universal wall fitting is secure, the quick disconnect can be removed without removing the universal wall fitting.
Properly Sized Feed Hose
For proper cleaner performance, the hose must be sized to fit your pool. To size correctly, follow the steps in Section D. Once sized, the feed hose should look like the one below.
| Entire Feed Hose Reaches Within 6" of Farthest Point of Pool* | |
| White Hoses Are Cut to Equal Lengths | Clear Hose is Equal to |
| Greatest Depth of Pool | |
Universal Wall | Floats Are Evenly Distributed | |
Fitting |
|
*Please Note: The illustrations in this section do not necessarily represent the farthest point for every pool. You must determine where the farthest point is in your pool.
4