III. Operation and Maintenance

A. What to Expect From Your Polaris 380

When operating correctly, the Polaris 380 will travel randomly throughout the pool, vacuuming, sweeping and scrubbing the bottom, sides, and most of the steps and swimouts. The Polaris will clean an average pool in 3 hours or less.

The Polaris comes equipped with an automatic pressure relief valve in the quick disconnect.

If the Polaris is receiving too much water pres- sure, it will release water at the quick disconnect.

The wheel RPM of the Polaris should be between 28 and 32.

Approximately every 2 minutes the Polaris 380 will go into back-up mode. At this time the back- up valve will pull the Polaris away from potential obstacles and increase its random pattern.

The sweep hose operates in a gentle sweeping motion to prevent debris from becoming trapped in hard-to-reach corners of the pool.

B. Turning On/Off the Polaris

Never run the booster pump without the pool filtration pump running. Turn on the filtration pump. Wait at least 30 seconds and turn on the booster pump. If the Polaris has been installed with time clocks, set them so the Polaris is turned on at least one half hour after the filtration pump has been turned on and shuts off one half hour before the filtration pump shuts off. Failure to follow these instructions could cause pump damage not covered in the Polaris warranty.

C. Operating Time

To find the optimum running time for your pool, start by running the Polaris for 3 hours. Decrease the time until you notice that your pool is not getting clean.

➔If you have a lot of debris in your pool

(i.e. after a storm), you can run the Polaris in two shorter cycles per day and empty the filter bag between cycles.

D.Connecting/Disconnecting the Polaris

To connect, turn off both pumps. Turn the quick disconnect clockwise into the universal wall fitting and pull away from the pool wall to secure. To disconnect, turn off both pumps. Push the quick disconnect in and turn counterclockwise.

Universal Wall

Fitting (Installed)

Peg

Quick Disconnect

➔To make connecting and disconnecting the quick disconnect even easier, periodi- cally lubricate the quick disconnect o-ring with o-ring lubricant.

E.Cleaning the Filter Bag

1.Remove the bag collar from the feed hose. Depress the prongs and remove the bag from the cleaner. There is no need to remove the bag collar from the bag.

Filter Bag

Prong

Depress Here

8

Page 8 Page 10
Page 9
Image 9
Polaris 380 III. Operation and Maintenance, What to Expect From Your Polaris, Turning On/Off the Polaris, Operating Time
Page 8 Page 10

380 specifications

The Polaris 380 is a standout in the world of automatic pool cleaners, known for its efficiency and advanced technology. Designed to keep both residential and commercial pools sparkling clean, the Polaris 380 offers a combination of performance, durability, and ease of use that makes it a popular choice among pool owners.

One of the main features of the Polaris 380 is its powerful three-wheel drive system. This unique technology allows the cleaner to navigate around the pool with unmatched agility, covering all areas meticulously. With a large suction intake and a strong jet propulsion system, the Polaris 380 effectively removes debris, dirt, and leaves from the pool floor and walls. Its robust design ensures that it can tackle even the toughest cleaning jobs, making it suitable for various pool types, including in-ground pools with a smooth or textured surface.

Equipped with a special filtration system, the Polaris 380 captures both large debris and fine particles, providing a comprehensive cleaning experience. The dual-chamber filtration bag ensures that it can handle a significant amount of debris before needing to be emptied, enhancing convenience for users. This efficient filtration capability allows the Polaris 380 to maintain a cleaner pool environment, reducing the need for additional filtration systems and improving water clarity.

Another admirable characteristic of the Polaris 380 is its ability to operate independently of the pool’s main filtration system. This means that with its own dedicated booster pump, the cleaner works efficiently without putting additional strain on the pool’s existing filtration system. This feature not only prolongs the lifespan of the pool's pump but also enhances overall cleaning efficiency.

Installation of the Polaris 380 is straightforward, requiring minimal setup. The auto-reverse feature allows the cleaner to avoid obstacles and change direction automatically, ensuring that every part of the pool is thoroughly cleaned. Additionally, the Polaris 380 is compatible with various pool shapes and sizes, making it a versatile solution for pool owners looking to maintain a pristine swimming environment.

In conclusion, the Polaris 380 combines advanced cleaning technology, user-friendly features, and efficient performance, making it an excellent investment for anyone seeking to keep their pool clean effortlessly. Its three-wheel drive, powerful filtration, and independent operation set it apart in the competitive landscape of pool cleaners, guaranteeing exceptional results and a hassle-free experience for users.
Top Page Image Contents