Installation, Trouble Shooting & Maintenance

START-UP

Model CGCL1

INSTALLATION

1. This unit is intended to be installed underneath a conventional kitchen sink, in a cabinet not less than 36" (914mm) wide (inside dimension). Two air openings with a minimum of 40" square (1016mm/square) each, minimum of 75% open area, must be provided in the cabinet. One opening must be in the overhang of the toe space. The other opening near the top of the cabinet. The remote unit must be installed with a minimum of 3" clearance between the unit and the rear wall of the cabinet. It can be installed flush against either side wall of the cabinet. The side louvers which are not against the cabinet must not be blocked by objects located within 4" (102mm) of the louvers. In addition, a minimum of 1 to 2" (25 to 51mm) clearance must be provided between the toe space air opening and front of the unit.

2. Water inlet and outlet are 1/4" (6 mm) O.D. tubes.

3. Connecting lines to be of copper, thoroughly flushed to remove all foreign matter before being connected to cooler.

4. Connect cooler to supply line with a shut-off valve and install a 1/4" O.D. (6 mm) tube. Make sure the cold water connecting to the faucet is filtered. Use an Everpure Commercial Grade Filter System to provide filtered water. Refer to the Everpure Filter system Install and Operation Manual for installation procedures.

CAUTION: Under certain conditions i.e., fluctuations in line pressure, water temperature, intermittent use, it is recommended to use a mini expansion tank to allow water expansion. See Everpure part number EV310413, not included in box.

5. Electrical: Make sure power supply is identical in voltage, cycle, and phase to that specified on cooler serial plate. Never wire compressor directly to the power supply.

1. Open supply line valve.

2. Purge air from all water lines by using water through faucet. A steady stream assures all air is removed.

3. Rotate fan to insure proper clearance and free fan action.

4. Connect to electrical power.

TROUBLE SHOOTING & MAINTENANCE

Temperature Control:

Factory set at 50°F under normal conditions. For colder water, adjust screw on item no. 10 in clockwise direction.

Ventilation:

Cabinet louvers and condenser fins should be periodically cleaned with brush, air hose or vacuum cleaner. Excess dirt or poor ventilation can cause no cold water and compressor cycling on the compressor overload protector.

Lubrication:

Motors are lifetime lubricated.

PAGE3

98256C (Rev. A - 4/06)

CGCL1 specifications

The Everpure CGCL1 is a high-performance water filtration system designed for commercial applications. It serves as an ideal solution for businesses that prioritize water quality to enhance the flavor of beverages and the safety of food preparation. Everpure, a brand renowned for its innovative water filtration technologies, has engineered the CGCL1 to deliver outstanding purification capabilities and exceptional performance.

One of the main features of the CGCL1 is its dual-filter technology. This system utilizes both activated carbon and microfiltration to effectively remove impurities, chlorine taste, odors, sediment, and various contaminants from water. The activated carbon not only aids in improving the taste and smell of water but also plays a crucial role in reducing harmful substances, making it ideal for coffee shops, restaurants, and commercial kitchens.

Another significant characteristic of the Everpure CGCL1 is its high flow rate, which ensures a consistent supply of filtered water. This feature is particularly beneficial for high-demand environments and is designed to withstand the rigors of daily commercial use. Additionally, the system incorporates a patented Scale and Corrosion Inhibitor technology, which helps prevent scaling and extends the life of equipment that relies on water.

The CGCL1 also features a user-friendly design, allowing for easy installation and maintenance. Its compact size allows it to fit discreetly in tight spaces, while the quick-change cartridge system makes filter replacements a hassle-free process. Operators can easily monitor filter life, ensuring that they maintain optimal water quality without interrupting service.

Flexibility is another key attribute of the Everpure CGCL1. It can be used for various applications, including coffee brewing, ice-making, and food preparation, making it versatile for different types of businesses. By providing clean and purified water, businesses can improve the overall quality of their offerings while adhering to health and safety standards.

In conclusion, the Everpure CGCL1 is a highly effective water filtration system that combines advanced filtration technology, high performance, and user convenience. With its ability to enhance water quality and prevent equipment damage, the CGCL1 is an essential investment for any commercial establishment aiming to deliver superior beverages and food. Its reliable and efficient operation fulfills the demands of busy foodservice environments while ensuring customer satisfaction.