Miele DA 6590 W Installing / replacing the odor-free filter, Resetting the odor-free filter timer

Cleaning and care

Installing / replacing the odor-free filter

In recirculation mode, an odor-free filter must be used in addition to the grease filters. It is designed to absorb cooking odors.

It is installed in the canopy above the grease filters.

Replacement active charcoal filters can be ordered from Miele.

￿To install or replace the odo-freer filter, the grease filters must first be removed as described in the previous pages.

￿Remove the odor-free filter from the packaging.

￿Slide the odor-free filter into the rear of the filter frame, then raise the front and push it into the frame.

￿Reinsert the grease filters and the panels.

Before first use:

￿Program the filter timer (see "Operation").

Replace the odor-free filter when:

–the odor-free filter symbol ￿ of the filter button comes on,

or

–when the filter no longer absorbs odors efficiently.

However, it should be changed at least every 6 months.

Used odor filters may be discarded with the household garbage.

Resetting the odor-free filter timer

After replacing the filter, reset the odor-free filter operating hours counter.

￿With the fan running, press the filter button ￿￿ twice and hold it for about 3 seconds, until only the 1 flashes.

The odor-free filter symbol ￿ goes out.

If you clean the odor-free filter before the operating time elapses:

￿Press the filter button ￿￿ twice and hold it for about 6 seconds, until only the 1 flashes.

18