Installing your SLA5500 | EN |
|
|
Before You Start
•Make sure that your wireless network is active.
•If your base station has Media Access Control (MAC) filtering enabled, make sure that the SLA5500’s MAC address is added to the Access Control List of your base station. For details see ‘MAC Address Control on the Wireless Network’.
•If you are using a firewall, make sure that your firewall is correctly configured for use with the SLA5500.
See ‘Extra information’ for more details.
Connecting the SLA5500
1Insert batteries and make sure it is correctly positioned as indicated by the engraved symbols.
2Connect the 1.8” plug of the cable to the audio socket on the SLA5500. Connect the other end to the AUX input of your audio system amplifier (2x RCA).
3Connect the power cable to the power socket on the Wireless Music Receiver and connect it to the power supply.
The Wireless Music Receiver should power on automatically after a few seconds. (if it does not, press the y button on the remote control).
4Select your display menu language: English, Français, Italiano, Deutsch, Español, or Nederlands.
Use 3 and 4 to select. Confirm with OK or 2.
The Wireless Music Receiver will automatically search for a currently available wireless network and start the Configuration Wizard on the device.
17
