Philips SLA5500 user manual

EN

3

4

a

b

c

d

6

3Select tab ‘Wireless Networks’.

In this tab you can control your wireless networks.

4Click on button ‘Add’.

This will open the Wireless network properties window.

Note: If this list is populated, ‘Remove’ all items first.

5a Fill in a Network name (SSID) you would like for your wireless network, for example: ‘philips’.

This is the name your streamium device will recognize.

5b Select Network Authentication ‘Open’.

5c Select Data encryption ‘Disabled’.

Note: If you want to enable WEP encryption, see details in this User Manual.

5d Mark the box next to ‘This is a computer-to-computer (ad hoc) network; wireless access points are not used’.

6Click on ‘OK’.

This will close the Wireless network properties window.

7Click on ‘OK’.

This will close the Wireless Network Connection Properties window.

Improving the start up time for the SLA5500 to Computer network (adhoc mode)

You might experience a long wait while the SLA5500 is 'searching for UPnP servers'. You can reduce this time by running the supplied AutoIP Network Utility.

•Insert the CD-Rom.

•Select ‘TOOLS’.

•Start ‘Auto IP Network Utility’.

•Follow on-screen instructions.

Note: Do not use the Auto IP Network Utility tool if you use a wireless base station or router in your network or if you have Internet Connection Sharing (ICS) enabled.

16