EN
Managing Profiles Using the Philips Wireless Music
Receiver PC Utility
The SLA5500 is delivered
There are two methods for managing profiles:
ADirectly on the SLA5500 using the remote control
BUsing the Philips Wireless Music Receiver PC Utility.
Default Profile Settings
The SLA5500 is delivered with the following default settings:
SSID: | philips |
IP address: | DHCP enabled |
Proxy: | No |
WEP: | disabled |
Mode: | Infrastructure |
PROFILE 1: |
|
SSID: | philips |
IP address: | DHCP enabled |
Proxy: | No |
WEP: | disabled |
Mode: | Infrastructure |
Viewing Existing Network Profiles
To view existing network profile details:
1From the main Philips Wireless Music Receiver PC Utility window, click on its name to select a Wireless Audio Link from the list and click the ‘Profiles...’ button.
2The Factory Defaults profile is displayed. Click on the other tabs to display alternative profiles, if any. The currently active profile has the ‘Make Active’ button grayed out (disabled) and an ‘Active Profile’ icon in the top right corner of the screen.
Note: This task can also be done directly on the SLA5500 using the remote control – see ‘Viewing Network Status Settings’.
Activating a Different Network Profile
To activate a different profile for a SLA5500:
1From the main Philips Wireless Music Receiver PC Utility window, click on its name to select a Wireless Audio Link from the list and click the ‘Profiles...’ button.
2Click on the appropriate profile tab and click the ‘Make Active’ button on that profile. Click the ‘Close’ button to return to the main window.
3Click the ‘Discover...’ button. The SLA5500 should be displayed in the main panel.
Note: This task can also be done directly on the SLA5500 using the remote control.
See ‘Activating a New Profile on the SLA5500 Using Remote Control’.
32
