Philips SLA5500 user manual MAC Address Control on the Wireless Network

Models: SLA5500

1 38
Download 38 pages 36.4 Kb
Page 14
Image 14
MAC Address Control on the Wireless Network

EN

MAC Address Control on the Wireless Network

If you are using MAC Address Control on your wireless network, you will need to know the MAC address of your Wireless Music Receiver. The MAC address is a unique number that identifies your device on the network. It consists of a series of numbers and letters in the following format: xx.xx.xx.xx.xx.xx

The MAC address for your Wireless Music Receiver is printed on the bottom of the device. It can also be displayed on the LCD screen. See ‘Viewing Network Status Settings’.

You must change your wireless network settings to exclude the Wireless Music Receiver’s MAC address from filtering. Please refer to your wireless network’s documentation for details on how to do this.

Enabling Internet Connection Sharing on Your PC

If your connection to the Internet is made available via a single PC, that PC must enable ‘Internet Connection Sharing’.

To set up and use the Internet Connection Sharing (ICS) feature in Microsoft Windows XP:

1Log on to the host computer as Administrator or Owner.

2On the taskbar, click ‘Start’, then ‘Control Panel’.

3In Control Panel, click ‘Network and Internet Connections’ under ‘Pick a category’.

4Click ‘Network Connections’ icon.

5Right-click the connection that you use to connect to the Internet and choose Properties from the menu. For example, if you connect to the Internet using a modem, right-click the desired Dial Up connection.

6Click the ‘Advanced’ tab.

This will give you access to the options for sharing your Internet Connection.

Next:

a)In the ‘Internet Connection Sharing’ section: Place a check mark to allow other users to connect through this computer’s Internet connection.

b)Remove the check mark that allows other network users to control or disable the shared Internet connection.

7Click OK (16). The following message appears:

‘When Internet Connection Sharing is enabled, your LAN adapter will be set to use

IP address 192.168.0.1. Your computer may lose connectivity with other computers on your network. If these other computers have static IP addresses, you should set them to obtain their IP addresses automatically. Are you sure you want to enable Internet Connection Sharing?‘

8Click Yes.

The connection to the Internet is shared with other computers on the local area network (LAN). The network adapter that is connected to the LAN is configured with a static IP address of 192.168.0.1 and a subnet mask of 255.255.255.0.

14

Page 14
Image 14
Philips SLA5500 user manual MAC Address Control on the Wireless Network, Enabling Internet Connection Sharing on Your PC