NEC LT150/LT85 user manual Connecting Your DVD Player, DVD player, Audio Equipment

Connecting Your DVD Player

DVD player

	Cr
	Cb
	Y
L	Cr
R	Cb

Y

White

Red

Audio Equipment

L

R

White

Red

	STATUS
	POWER
		ON/
		STAND BY
			SOURCE
AUDIO				PC CARD		AUTO	MEN
					ADJUST		U
RGB					ACCESS		SELE
	S-					E	CT
PC	VIDEO					R
	CONTROL						L
							CANCE
		VIDEO
		USB	PC	CARD

AC IN

		RGB	INPUT
AUDIO
		S-
	PC	VIDEO
		CONTROL
				VIDEO

Optional 15-pin-to-RCA 3 cable (optional)

(Component V )

Audio cable

(not supplied)

You can connect your projector to a DVD player with component outputs or Video output. To do so, simply:

1. Turn off the power to your projector and DVD player.

2. If your DVD player has the component video (Y,Cb,Cr) output, use the optional 15-pin-to-RCA 3 cable to connect your DVD player to the RGB INPUT connector on the projector.

For a DVD player without component video (Y,Cb,Cr) outputs, use common RCA cables (not provided) to connect a composite VIDEO output of the DVD player to the Video Input of the projector.

3. Turn on the projector and DVD player.

NOTE: Refer to your DVD player’s owner’s manual for more information about your DVD player’s video output requirements,

E–24